Instruction/ maintenance manual of the product MC3810-2 Pelco
Go to page of 8
MC3810-2 1/3-Inch Monochr ome Camera Installation/ Operation Manual C1905M (10/99) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.
2 P elco Manual C1905M (10/99) CONTENTS Section Page DESCRIPTION ................................................................................................................... 3 LOCA TION AND FUNCTION OF P ARTS ...................................
P elco Manual C1905M (10/99) 3 DESCRIPTION The MC3810-2 is a blac k and white video camera that is designed f or use in a monitoring system. Features High resolution and high sensitivity with a 1/3-in.
4 P elco Manual C1905M (10/99) REAR Refer to Figure 2 f or par ts on the rear of the camera. Figure 2. Location of Rear P ar ts 6 V -PHASE adjustment screw Use to adjust the vertical phase of cameras synchronized by line loc k.
P elco Manual C1905M (10/99) 5 INST ALLA TION The lens must be either a C- or CS-mount type of less than 2.2 pounds (1 kg). The protru- sion behind the mounting surf ace must be within the limits as shown in Figure 3. The camera is supplied with a lens connector f or inser ting the pow er and control cable of an auto iris lens.
6 P elco Manual C1905M (10/99) BACKFOCUS ADJUSTMENT 1. Set the CCD-IRIS switch on the rear of the camer a OFF . 2. Set the iris wide open and the focus on infinity or a distant object. If you ha ve an auto iris lens, use a neutral density filter or other means to decrease the amount of light so that the iris will open as wide as possible.
P elco Manual C1905M (10/99) 7 SPECIFICA TIONS GENERAL Image Device 1/3-inch interline transf er CCD Picture Elements 510 (H) x 492 (V) Sensing Area 3.3 mm (H) x 4.4 mm (V) Scanning System 525 lines, 2:1 interlace Sync System AC line loc k Horizontal Resolution 380 TV lines Minimum Illumination 0.
8 P elco Manual C1905M (10/99) P elco , the Pelco logo , Camclosure, Esprit, Genex, Legacy , and Spectra are registered trademarks of Pelco . ©Copyright 1999, P elco . Endura and ExSite are trademarks of P elco . All rights reser ved. REVISION HISTOR Y Manual # Date Comments C1905M 10/99 Original version.
An important point after buying a device Pelco MC3810-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MC3810-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MC3810-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MC3810-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MC3810-2 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MC3810-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MC3810-2.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MC3810-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MC3810-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
