Instruction/ maintenance manual of the product IS20CHV10S Pelco
Go to page of 28
INST ALLA TION C3472M-C (9/1 0) IS20/IS21 Series Camclosure ® 2 Integrated Camera System Color and Day/Night Models Flush Mount, Surface Mount.
2 C3472M-C (9/10) Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructi ons . . . . . . . . . . . . . . .
C3472M-C (9/10) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
4 C3472M-C (9/10) UL LISTED MODELS WARNINGS • This apparatus must be earthed. • T o prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to dripping or splash ing and that no ob jects filled with liquids, such as vases, should be placed on the apparatus.
C3472M-C (9/10) 5 8. Cleaning the camera body: • T urn the power off when cleanin g the produc t. Use a dry cloth to clean the product. • Do not use strong abra sive detergent when cl eaning the product body . When the dirt is hard to remove, use a mild detergent and wipe gently.
6 C3472M-C (9/10) We declare under our sole responsibility that th e product to which th is declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/ 108/EC.
C3472M-C (9/10) 7 Limitation of Liability THIS PUBLICA TION IS PROVIDED “AS IS” WITHOUT WARR ANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED W ARR ANTIES OF MERCHANTABIL ITY , F ITNESS FOR ANY P ARTICULAR PURPOSE, OR NON-INFRIN GEMENT OF THE THIRD PARTY’S RIGHT .
8 C3472M-C (9/10) Description The IS20/IS21 Series Camclosure ® 2 camera system integrates a camera and lens package into a small versatile indoor enclosure that can be mounted directly to, or rece ssed into, a ceiling or wall .
C3472M-C (9/10) 9 Product Overview (Day/night model shown) Figure 1 . Product Overview of IS20-D N Camera ì Video Ou tput Connector: T ransmits composite video signals. î Power Cable: Supplies 24 V AC or 12 V DC from an external power source. ï Panning T able Lock Screw (LOCK): Fixes the panning table.
10 C3472M-C (9/10) ~í Dip Switch: Selects ON/OFF of white balance, backlight co mpensation, Adaptive Blac k Stretch or day/night mode. Figure 2. Default Dip Switch Settings Simple day/night mode select or (D/N) for color models: ON: The camera selects black-an d-white mode if the p icture is dark, or color mode if the picture is b right enough.
C3472M-C (9/10) 11 Installation The following installation should be performed by qu alified service personnel or system installers. NOTES: • Procure 4 mounting screws according to the material of the installation area. In this case, wood screws and nails should not be used.
12 C3472M-C (9/10) b. Adjust the marker on this unit to “I” on the top cover , and turn the top cover counterclockwise to remove it (refer to Figure 5). NOTE: The dome cover and the inner dome cover are joined into a single unit; therefore, never try to remove them.
C3472M-C (9/10) 13 MOUNTING THE CAMERA The mounting requirements are shown as follows: *Make sure that the installed mount bracket can support more than five times the weight of the camera. USING A 2-GANG JUNCTION BOX 1. Install the 2-gang junction box (n ot supplied) onto the wa ll/ceiling.
14 C3472M-C (9/10) SURFACE MOUNTING 1. Prepare the mounting space. • If the camera is directly mounted on a wall/ce iling, align the camera mounting position with the position of the hole through which the cables are routed, and then make the hole.
C3472M-C (9/10) 15 3. Attach the ceiling mount b racket onto the ceiling boa rd (refer Figure 8). NOTE: Maximum thickness of the ceiling board is 30 mm (1.
16 C3472M-C (9/10) WIRING Figure 9. Video Output Co nnector and Power Ca ble VIDEO OUTPUT CONNECTION NOTE: When connecting the coaxial cable to the video output connector , make sure that the connector of the coaxial cable is locked firmly.
C3472M-C (9/10) 17 POWER CONNECTION Connect the 3-conductor cable of the camera to the power supply . Figure 10. Power Cable T able B. Power Wire Colors and Func tions Wire Color 12 V DC 24 V AC Brown.
18 C3472M-C (9/10) CABLE LENGTH AND WIRE GAUGE 24 V AC The voltage supplied to the power terminals of the ca mera should be within 19.5 V AC and 28 V AC. 12 V DC Use the formula below to calculate the power cable and po wer supply . The voltage supplied to the power terminals of the camera should be within 10.
C3472M-C (9/10) 19 IMAGE ADJUSTMENT PAN, T ILT, AND AZIMUTH ADJUSTMENT 1. Rotate the panning table (3 20-degree range) to adjust t he panning position of the camera (refer to Figure 11). The adjusting range is from +180 degrees (clockwise) to –140 degrees (counterclockwise).
20 C3472M-C (9/10) 3. Rotate the tilting table (±75-degree range) to adjust t he tilting position of the camera (re fer to Figure 12). NOTES: • This lens can also be rotated in th e reverse direct ion, but the image azimuth is reversed. In such a case, turn the panning table to the 180-degree side to correct the azimuth image.
C3472M-C (9/10) 21 ZOOM AND FOCUS ADJUSTMENT 1. Loosen the zoom lock lever and move the lever between TELE and WIDE to obtain the appropriate angle of view (refer to Figure 14). 2. T ighten the zoom lock lever . 3. Loosen the focus lock lever and move the lever between F AR and NEAR to obtain the optimum focus.
22 C3472M-C (9/10) ASSEMBLING THE CAMERA 1. Mount the top cover (refer to Figure 15): a. Adjust the marker of this unit to “I” on the top cover to install the top cover . Figure 15. Mounting the T op Cover b. Rotate the top cover clockwise to adjust the marker to “II.
C3472M-C (9/10) 23 c. T urn the dome cover block to the right and left while watching the monitor . Make adjustments so that no eclipse is caused. d. Rotate the top cover clockwise to adjust the marker to “III.” 2. Secure the top cover and the camera main unit with an accessory fixing screw (M3).
24 C3472M-C (9/10) 3. ( Flush mount models only ) Attach the supplied flush mount cover: a. Match the logos on the cover and on the main body of the camera. b. Pull out both of the spring hooks and attach the hooks to the cover . c. Make sure that the cover is attached to the ceiling with no space between them.
C3472M-C (9/10) 25 Specifications Power Source and Consumption P AL 24 V , 50 Hz, 2.7 W (AC); 12 V , 220 mA (DC) NTSC 24 V , 60 Hz, 2.7 W (AC); 12 V , 220 mA (DC) Image Sensor 1/3 inch interline transfer CCD Effective Pixels P AL 752 (H) x 582 (V) NTSC 768 (H) x 494 (V) Scanning Area 4.
26 C3472M-C (9/10) (Weights and dimensions indicated are approximate.) Ø 0.16-0.18 (0.40-0.45) Ø 1.18-1.97 (3.00-5.00) 0.18 (0.45) Ø 5.10 (12.95) 3.29 (8.35) 1.81 (4.60) 5.10 (12.95) Ø 1.58 (4.00) 1.89 (4.80) 3.66 (9.30) 7.32 (18.60) Ø 1.58 (4.00) 2.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge , any merc handise prove d defective in material or workmanship for a period of one year after the date of shipment .
Pelco, Inc. W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
An important point after buying a device Pelco IS20CHV10S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco IS20CHV10S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco IS20CHV10S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco IS20CHV10S you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco IS20CHV10S will certainly help you make a decision on the purchase.
If you already are a holder of Pelco IS20CHV10S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco IS20CHV10S.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco IS20CHV10S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco IS20CHV10S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center