Instruction/ maintenance manual of the product IPSXM31C22-2X Pelco
Go to page of 48
ExSite ™ Series Explosionproof Positioning System OPERATION/PROGRAMMING C1300M-B (6/05).
.
C1300M-B (6/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Welcome . . . . . . . .
4 C1300M-B (6/05) Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Enable Motion Detection (23X Day/Night Camera) .
C1300M-B (6/05) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 C1300M-B (6/05) W elcome Thank you for purchasing Pelco’ s ExSite™ IPSXM Series explosionproof positioning system. Y our new system features a high resolution, camera/optics package with programmable software. This manual is designed to be a reference tool for the operation and programming of your system.
C1300M-B (6/05) 7 How to Operate Y our System Operation How to Control Pan and T ilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far , do the following: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.
8 C1300M-B (6/05) ACCESSING MAIN MENU (PRESET 95) Y ou can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using.
C1300M-B (6/05) 9 Quick Start Guide – System Setup Quick Programming Guide Access the main menu (preset 95). See the Accessing Main Menu (Preset 95) section. Use the joystick to position the cursor beside menu selection. If your controller does not have a joystick, use the up or down key.
10 C1300M-B (6/05).
C1300M-B (6/05) 11 Quick Programming Guide (See Page 9) Language The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Polish, Russian, T urkish, and Czechoslovakian. The factory default language is English.
12 C1300M-B (6/05) Unit Inversion Unit inversion reconfigures the system so that it operates normally when it is installed in an inverted postion. The following are the available settings for unit inversion. Figure 1. Installation Methods To reconfigure the unit for inverted operation and control: 1.
C1300M-B (6/05) 13 Quick Programming Guide (See Page 9) System Information The system Information screen displays ExSite model, software version, available memory , and other diagnostic information. System settings cannot be changed using this screen.
14 C1300M-B (6/05) Display Setup Display setup allows you to program how labels are displayed on the monitor . The following labels are available: PRESET LABEL Identifies preset. ZONE LABEL Identifies zone. ZOOM Identifies the amount of magnification.
C1300M-B (6/05) 15 Quick Programming Guide (See Page 9) LABEL POSITIONS Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: Preset Label Zone Label Alarm 1 Azimuth*/Elevation**: XXX°/-XX° Zoom Ratio: XXX.
16 C1300M-B (6/05) Unit Settings CAMERA T YPE OF LIGHTING Pelco has calibrated settings that optimize the white balance, and the picture, for indoor and outdoor lighting conditions. There are two settings: OUTDOOR (default) INDOOR AUTO FOCUS Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
C1300M-B (6/05) 17 Quick Programming Guide (See Page 9) IR CUT FILTER (23X DAY/NIGHT CAMERA) ExSite IPSXM has two modes of operation: color and black-white. Y ou can increase sensitivity in low light conditions by switching to black-white mode (removing the IR cut filter).
18 C1300M-B (6/05) ADVANCED CAMERA SETTINGS SHUTTER SPEED Shutter speed is the duration of the electronic shutter . Program shutter speed to operate automatically (Auto) or manually (Numeric V alue). Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment.
C1300M-B (6/05) 19 Quick Programming Guide (See Page 9) AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user -defined level.
20 C1300M-B (6/05) BACKLIGHT COMPENSATION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The system uses the center of the picture to adjust the iris.
C1300M-B (6/05) 21 Quick Programming Guide (See Page 9) MOTION PROPORTIONAL PAN Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings.
22 C1300M-B (6/05) PARK T IME This feature allows the system to begin a specified operation (scan, preset, or pattern) after a programmed time of inactivity . Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature.
C1300M-B (6/05) 23 Quick Programming Guide (See Page 9) SCAN SPEED Scan speed is the degrees per second that the system will pan when in scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second.
24 C1300M-B (6/05) LIMIT STOPS Limit stops are programmable stops that limit the pan range of the unit. There must be two limits, a left and a right, to define an area. There are two types of limit stops: To set manual or scan stops: 1. Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.
C1300M-B (6/05) 25 Quick Programming Guide (See Page 9) AZIMUTH ZERO Azimuth is the pan angle from 0 to 359 degrees. Azimuth zero is the pan position you specify to be the 0-degree point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point.
26 C1300M-B (6/05) POWER UP POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the system is cycled.
C1300M-B (6/05) 27 Quick Programming Guide (See Page 9) LINE SYNC Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: ExSite IPSXM automatically senses V-Sync input. No line sync setup is required for Pelco control systems that provide a V-Sync signal.
28 C1300M-B (6/05) PRESETS The ExSite IPSXM system has 80 programmable preset positions. Each preset can be programmed to use pan, tilt, all programmable camera settings, and motion detection. The presets are numbered 1-32 and 35-82. Presets 33 and 34 are fixed commands that cannot be programmed.
C1300M-B (6/05) 29 Quick Programming Guide (See Page 9) ENABLE MOTION DETECTION (23X DAY/NIGHT CAMERA) The following are the settings for MOTION DETECTION ENABLED: NOTE: Motion detection does not work if the shutter speed is set at less than 1/60 of a second.
30 C1300M-B (6/05) ACTIVATE AUX COMMAND (23X DAY/NIGHT CAMERA) Motion detection can be programmed to trigger an auxiliary command when motion is detected. The following are the settings for ACTIV A TE AUX: AUX T IME (23X DAY/NIGHT CAMERA) Aux time is the length of time the auxiliary will remain on after motion is detected.
C1300M-B (6/05) 31 Quick Programming Guide (See Page 9) PATTERNS A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power -up).
32 C1300M-B (6/05) ZONES A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The IPSXM positioning system is capable of eight zones, each with a 20-character label. To program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER.
C1300M-B (6/05) 33 Quick Programming Guide (See Page 9) WINDOW BLANKING Window blanking allows a user to program up to eight, four -sided, user-defined areas that cannot be viewed by the operator of the system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide.
34 C1300M-B (6/05) REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the blanking area remain visible. Reversing the window a second time will return it to its original condition.
C1300M-B (6/05) 35 Quick Programming Guide (See Page 9) ALARMS The ExSite IPSXM system has seven alarm inputs, which can be programmed as high, medium or low priority . When an alarm is received, an input signal to the unit triggers the user -defined action (go to preset, run pattern, etc.
36 C1300M-B (6/05) 3. Select the alarm priority: a. Use the joystick to position the cursor beside ALARM PRIORITY . b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default).
C1300M-B (6/05) 37 Quick Programming Guide (See Page 9) 5. Set the auxiliary to activate: a. Use the joystick to position the cursor beside ACTIV A TE AUX. b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the following available selections.
38 C1300M-B (6/05) WIPER The following IPSXM unit models feature a window wiper to clear moisture from the window of the enclosure: IPSXM31C22-2 IPSXM31C22-7 IPSXM31C22-2X IPSXM31C22-7X IPSXM31CBW23-2 IPSXM31CBW23-2X IPSXM31CBW23-7 IPSXM31CBW23-7X NOTE: The Wiper menu is available only on the above models.
C1300M-B (6/05) 39 Quick Programming Guide (See Page 9) SET W ASHER SEQUENCE An external washer (not supplied by Pelco) can be used to wash the window of the enclosure. Accessing AUX 3 or selecting Preset 87 will start the washer sequence. Use the following steps to program the washer sequence.
40 C1300M-B (6/05) AUX An auxiliary output is a programmable signal from the system that can trigger another device to operate. An auxiliary output is programmable to trigger from an alarm or from a controller . An AUX 1 command from the controller will activate the relay in the system and operate the device that is connected to the relay .
C1300M-B (6/05) 41 Quick Programming Guide (See Page 9) CLEAR Use this setting to clear user -defined settings or return the system to factory default settings.
42 C1300M-B (6/05) PASSWORD ExSite IPSXM features password protection to prevent unauthorized changes to the system settings. An operator can open the System Information and Display Setup Screens, but cannot access any of the Unit Settings menus. Controller/keyboard commands cannot override password-protected settings.
C1300M-B (6/05) 43 Position Calibration Position calibration sets the preset reference point for all automatic positioning system movements. Before programming presets, patterns, zones, labels, and window blanking, program and document the position calibration point.
44 C1300M-B (6/05) Reset, Cycle Power , Reboot RESET CAMERA Use this function to reset all camera settings to factory default parameters. NOTE: Reset camera restores all camera settings, except those associated with presets. CYCLE CAMERA POWER If the camera is not operating or if you lose camera control, cycle camera power .
C1300M-B (6/05) 45 Software/Language File Upload The ExSite IPSXM system allows access for on-site setup, testing, and uploading of revised operating software and language files.
46 C1300M-B (6/05) Specifications *Manual control of camera setup functions can be done with CM6700, CM6800, CM8500, CM9500, CM9740, CM9760, CM9770, CM9780, KBD200A, KBD300A, and MPT9500 controllers, but not with CM7500, MPT9000 or KBD9000 controllers.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco IPSXM31C22-2X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco IPSXM31C22-2X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco IPSXM31C22-2X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco IPSXM31C22-2X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco IPSXM31C22-2X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco IPSXM31C22-2X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco IPSXM31C22-2X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco IPSXM31C22-2X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco IPSXM31C22-2X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
