Instruction/ maintenance manual of the product IP110 Pelco
Go to page of 44
INST ALLA TION C3432M-G (4/0 9) IP110 Series Camclosure ® Integrated Camera System.
.
C3432M-G (4/09) 3 Contents Important Safety Instructi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C3432M-G (4/09) List of Illustrations 1 DHCP Network Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Endura Network Example . . . . . . . . . . . . . . . . . . . . . .
C3432M-G (4/09) 5 List of T ables A IP110 Series Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 B Wire Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . .
6 C3432M-G (4/09) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
C3432M-G (4/09) 7 Regulatory Notices This device complies with Part 15 of the FCC Rules. O peration is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
8 C3432M-G (4/09) Open Source Software Notice This product includes certain open source or other softwar e originated from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Publ ic License (LGPL), and different and/or additional copyright lic enses, disclaimers, and notices.
C3432M-G (4/09) 9 Description The IP110 Series Camclosure ® is an indoor/outdoor , fixed mini dome system with a built-in 100Base-TX network interface for live streaming to a standar d Web brows er (Microsoft ® Internet Explorer ® or Mozilla ® Firefox ® ).
10 C3432M-G (4/09) Basic System Configurations Figure 2. Endura Network Example Figure 1. DHCP Network Ex ample IMPORT ANT NOTE. PLEASE READ . The network implementa tions in this document are shown as general representations only and are not intended to show detailed network topologies.
Figure 4. S tatic Network Example Figure 3. Private Network Example C3432M-G (4/09) 11 IP110 IP110 WEB BROWSER PRIVA TE NETWORK NETWORK SWIT C H IF NOT DH C P, C AMERA IS ASSI G NED DEFAUL T IP ADDRESS 192.
12 C3432M-G (4/09) Cover and Back Box Installation The IP110 Series Camclosure integrated camera system mounts only to a surface. It can be wired through the cover into a surface, electrical box, plaster ring, or through a side conduit opening. NOTE: A flash mount adaptor ring is av ailable.
C3432M-G (4/09) 13 4S ELECTRICAL BOX INSTALLATION 1. Attach an ICS110-AP adapter plate (not supplied) to a 4S electrical box. Use two 8-32 x 0.75-inch Phillips flat head screws (supplied with both the IP110 and the ad apter plate). 2. Remove the two 8-32 x 0.
14 C3432M-G (4/09) 404 PLASTER RING INSTALLATION 1. Remove the two 8-32 x 0.37 5-inch Phillips pan head scr ews and washers (supplied) to sepa rate the cover from the back box. 2. Pull the cable and wires into the cover . Use three 6-32 x 0.75-inch Phillips pan head screws (supplied) or two 8-32 x 0 .
C3432M-G (4/09) 15 SIDE CONDUIT INSTALLATION 1. Remove the two 8-32 x 0.37 5-inch Phillips pan head scr ews and washers (supplied) to sepa rate the cover from the back box. 2. Remove the conduit plug from the cover . Inst all a 0.7 5-inch (1.91 cm) threaded conduit connector (not supplied) into the conduit hole in the cover .
16 C3432M-G (4/09) Wiring T ables CAT5 CABLE Connect a Cat5 cable to the RJ-45 network connector . The 8-pin connector includes video and PoE for the camera. PoE (IEEE 802.3af) injects power over the same ca bling that carries the network data, eliminating the need for a separate power supply .
C3432M-G (4/09) 17 ALARM AND 24 V A C WIRES CONNECTING A RELAY DEVICE The IP110 Camclosure has an output for triggering an external device. It supports both momentary and continuous relay operation. Y ou can operate the relay interactively, during an acti ve connection, or automatically to coincide with certain events.
18 C3432M-G (4/09) CONNECTING ALARMS The IP110 Camclosure provides an alarm input for exte rnal signaling devices, such as door cont acts or motion detectors. Both normally open and normall y closed devices are supported. The IP110 Series Camclosure supports supervised and unsupervised alarms.
C3432M-G (4/09) 19 Camera Module The IP110 Series Camclosure camera module includes the camera, camera bracket, and heater board. To perform most camera adjustments, you must remove the module from the back box. Use the following instructions to in stall or remove the c a mera module.
20 C3432M-G (4/09) MODULE INSTALLATION T o install the camera module into the back box: Figure 13. Back Box Connectors 1. Plug the camera (10-pin), heater bo ard (4-pin), and service (3-pin) connectors into the ba ck box (refer to Figure 13 ). HEA TER C ONNE C TOR SERVI C E C ONNE C TOR C AMERA C ONNE C TOR 2.
C3432M-G (4/09) 21 Camera Adjustments T o perform camera adjustments: 1. Make sure the camera and service connectors are connected to the board inside the back box. Yo u may have to remo ve the camera module from th e back box. 2. Connect a monitor to the service connector (refer to Service Connector on pa ge 32 ).
22 C3432M-G (4/09) V ARIFOCAL LENS ZOOM AND FOCUS ADJUSTMENTS NOTE: Y o u will need a miniature Phillips or flat-tip screw driver to loosen and tighten the locking screws. T o adjust the field of view: 1. Loosen the zoom locking screw (refer to Figure 15 ).
C3432M-G (4/09) 23 T o adjust the fo cus: 1. Loosen the focus locking screw . 2. Position the inverted dome appro ximately 0.125 inch (3.175 mm) from the front of the lens. Make sure that the len s and the dome are centered (refer to Figure 16 ). 3. T urn the focus locking screw clockwise or counterclockwise to adjust the focus.
24 C3432M-G (4/09) DN/CH SERIES ADJUSTMENTS Figure 17. Adjusting the IP110-DN/CH S eries Camclosure Refer to Figure 17 to adjust the IP110-DN or IP110-CH model.
C3432M-G (4/09) 25 SW4-4: Flickerless In certain lighting conditions, a flicker in the light source may affect camera operation. Flic kering can be caused by a number of conditions, including the qua lity of the source power and the age and type of fluorescent bulbs and ballasts.
26 C3432M-G (4/09) DAY/NIGHT OPERATION NOTE: This section only applies to DN model cameras. DN model cameras regularly check the brightness level of t he field of view t o determine when to switch between day (color) and nig ht (black-white) operation.
C3432M-G (4/09) 27 DW/CW SERIES (WIDE DYNAMIC RANGE) ADJUSTMENTS Figure 19. Adjusting the IP110-DW/CW S eries Camcl osure Refer to Figure 19 to adjust the IP110-DW or IP110-CW model. SWITCH SETTINGS Locate the DIP switch. Then set the switches for your installation.
28 C3432M-G (4/09) SW1-4: Auto White Balance/ Manual White Balance Auto white balance (AWB) is enabled by default (ON). T o manually set and lock the white balance: 1. Set SW1-4 to ON. 2. Hold a white background in front of the lens until the video shows all white.
Figure 20. DW Model s Threshold S wi tching Levels C3432M-G (4/09) 29 Figure 18 and T able D show how the camera switches between color and black-white operation for each setting. NOTE: These switching thresholds are approximate and were measured using a 3.
30 C3432M-G (4/09) Camera Positioning Manually rotate and tilt the camera module to posi tion the camera, and then tighten the tilt screws (axis 1 in Figure 21 ). Figure 21. Positioning the Camera NOTE: Do not over -rotate the module. Excessively turni ng the module in one direction could result in damage to the wiring.
C3432M-G (4/09) 31 Install Dome and T rim Ring Figure 22. Dome Liner Adjustment 1. T o adjust the d ome liner (refer to Figure 22 ): a. Align the screw holes in the trim ring with those in the back box to identify the proper dome liner positio n. b. Loosen the three Phillips screws located in t he trim ring.
32 C3432M-G (4/09) Service Connector Figure 23. S ervice Connector The IP110 Series Camclosure integrated camera system includes a service connector th at outputs camera vide o. Use it at the installation site to set up the field of view and focus the camera.
Figure 24. Attaching the 2.5 mm Monaural Headphone Plug C3432M-G (4/09) 33 d. Solder the center conn ector of the cable to t he center pin of the plug. e. Thread the braid of the cable through the hole in the crimp pin. f. Solder the braid to the top of the crimp pin.
34 C3432M-G (4/09) Reset Button Use the reset button locate d on the board inside the back box to access the following modes described in T able E. T o access one of these modes: 1. Press and hold the reset button. The unit starts cycling throug h the modes; hold the b utton for four seconds to access (cycle thro ugh) each mode.
C3432M-G (4/09) 35 T roubleshooting If the following instructions fail to solve your problem, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-292-1981 (international) fo r assistance. Y ou should have the serial number from the product label available.
36 C3432M-G (4/09) Image too light Installation error • Check DIP switch settings. • Use a service connector to check camera operation. Connect one end of the service connector to the service connector input inside the back box. Then connect the other end of the service connector to a monitor .
C3432M-G (4/09) 37 Network not working Faulty cable connection Check all cable connections and ensure all plugs are properly plugged in. Incorrect serial device configuration A hub will not work with the available network bandwidth shared across all ports.
38 C3432M-G (4/09) Specifications GENERAL Pan/T ilt Adjustment Manual Pan 360° T ilt 80° (20° to 100° range) Rotation 360° Construction Aluminum with steel camera mounting bracket and polycarbona.
C3432M-G (4/09) 39 VIDEO Signal System NTSC or PAL Compression MPEG-4, MJPEG in Web viewing mode Video Streams 3, simultaneous Video Resolutions NTSC PAL 4CIF 704 x 480 704 x 576 2CIF 704 x 240 704 x .
40 C3432M-G (4/09) LENS T ype V arifocal with auto iris Focal Length 3.0~9.5 mm 9.0~22.0 mm Format Size 1/3-inch Operation Iris Auto (DC drive) Focus Manual Zoom Manual (Design and product specifications subject to change without notice.) Ø 3.79 (9.63) Ø 5.
C3432M-G (4/09) 41.
REVISION HISTORY Manual # Da te Comment s C3432M 3/07 Original version. C3432M-A 5/07 Cable harnesses modified per ECO 07-17470. Adde d picture elements to specifications. C3432M-B 8/07 Added FCC Class B and revised DIP sw itch setting adjust ments. C3434M-C 11/07 Revised figu res 20 and 22.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise pr oved defective in mate rial or work manship for a period of one year after the date of shipment.
Pelco, Inc. W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 U S A U S A & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
An important point after buying a device Pelco IP110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco IP110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco IP110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco IP110 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco IP110 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco IP110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco IP110.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco IP110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco IP110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
