Instruction/ maintenance manual of the product ID Pelco
Go to page of 16
QUICK START C2961M (10/ 09) ID and IDE Series Network Fixed Dome Cameras Sarix ™ T echnology.
2 C2961M (10/09) Product Overview Figure 1. Camera Connections an d Features.
C2961M (10/09) 3 NOTES: • Pelco recommends co nnecting the ca mera to a network th at uses a Dynamic H ost Configuration Protocol (DHCP) ser ver to address device s. • Do not use a hub in the net work setup of the camera. • T o secure acce ss to the IP camer a, place the camer a behind a fire wall when it is conn ected to a network.
4 C2961M (10/09) Installation BACK BOX AND LENS For detailed instructions, refer to the ID Series Installation/Operation m anual o r the IDE Series Installation/Operation manual. Bo th ar e available on th e resource disc. NOTE: Megapixel lenses are designed and tested to delive r optimal image quality to megapixel cameras.
C2961M (10/09) 5 3. Plug the network cable in to the RJ-45 network por t on the side of the back box. If the network has no PoE, connect a 24 V AC Class 2 power supply to the 24 V AC power connector . Figure 3. RJ-45 Pin Descriptio ns 4. Connect the necessary wiring for alarms and relays (refer to Figure 4).
6 C2961M (10/09) 5. Install the back box using one of the follow ing options: • In-Ceiling Instal lation (1) Install the back box by compre ssing t he spring clips and pushing the back box through the hole (refer to Figure 6 ). (2) T ighten the machine screws completely to secure the back box to the ceiling.
C2961M (10/09) 7 7. Position the camera a. View the camera image using the service port or a Web browser . b. Unlock the tab locks located on each side of the camera. c. Manually rotate and tilt the camera module to position the camera. Do not over -rotate the module.
8 C2961M (10/09) DOME LINER AND LOWER DOME 1. Align the magnets on the dome liner with the magnets located on the back box (refer to Figure 9). Figure 9. Installing the Dome Liner 2. Attach the lower dome leash to the back box (refer to Figure 10). Figure 10.
C2961M (10/09) 9 3. Move the lower dome latches away from the bubbl e until you hear a click. Align the lower dome latches with the slots located on the back box (refe r to Figure 11).
10 C2961M (10/09) Operation Once the camera is installed, apply power to the camera. The camera will start a configuration sequence: the green LED flashes five times per second for approx imately two minutes, and then turns solid after the boot cycle is complete a nd the camera is on lin e.
C2961M (10/09) 11 MINIMUM SYSTEM REQUIREMENTS ID SERIES Processor: Intel ® Pentium ® 4 microprocessor , 1.6 GHz Operating S ystem: Microsoft ® Win dows ® XP , Windows V ista ® , or Mac ® OS X 10.
12 C2961M (10/09) LIVE PAGE ICONS Viewable icons are based on group permissions. Show Device List: Displays a list of viewable cameras connected to the same virtual lo cal area network (VLAN) as the camera to which you are logged on. Disable Viewer: Closes the live view window .
C2961M (10/09) 13 SETTINGS PAGE Depending on user permissions, t he Settings page allows you to manage camera system settings, set up users and groups, and control the camera.
14 C2961M (10/09) A/V STREAMS T AB Use the A/V Streams tab to conf igure the video and audio streams for the camera. The A/V Streams tab includes a Video Presets page, a V ideo Configuration page, and an Audio Configuration page.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise proved defective in materi al or workma nship for a period of one year after the date of shipment.
Pelco, Inc. W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
An important point after buying a device Pelco ID (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ID yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ID - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ID you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ID will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ID, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ID.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ID. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ID along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
