Instruction/ maintenance manual of the product ICS150 Pelco
Go to page of 2
Congratulations on receiving Pelco’ s Camclosure ™ Point of Sale (POS) Display . This display is provided to demonstrate the high quality , compact size, and aesthetic value of Pelco’ s Camclosure Integrated Camera Systems. ® ™ C2427M (1/01) 3500 Pelco Way, Clovis | CA 93612-5699 USA | www.
POS SETUP The Camclosure Point of Sale (POS) Display can be used as a freestanding exhibit or directly mounted to a wall. Freestanding Display 1. Install the two support brackets to the back of the display (refer to Figure 1). 2. Reposition the ICS300 enclosure located on the front of the display (refer to Figure 2).
An important point after buying a device Pelco ICS150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ICS150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ICS150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ICS150 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ICS150 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ICS150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ICS150.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ICS150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ICS150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
