Instruction/ maintenance manual of the product ICS-DO101ABK Pelco
Go to page of 12
Installa tion/Oper a tion ICS-DO101ABK Inte gr a ted Camera System f or the MR5000 Series Pub lic V iew System C2436M-B (9/02) ® Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www .
[ 2 ] Pelco Manual C2436M-B (9/02).
Pelco Manual C2436M-B (9/02) [ 3 ] TABLE OF CONTENTS IMPORT ANT SAFEGUARDS AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[ 4 ] Pelco Manual C2436M-B (9/02).
Pelco Manual C2436M-B (9/02) [ 5 ] IMPORT ANT SAFEGU ARDS AND WARNINGS DESCRIPTION Designed specifically for the MR5000 Series Public View System , the ICS-DO101ABK Integrated Camera System packages a camera and lens into a small, discreet, high-security dome.
[ 6 ] Pelco Manual C2436M-B (9/02) 3 Connect Video and Po wer 1. Connect the video cable. Place the cable inside the MR5000 Series mount arm and install the bottom end cap of the mount to conceal the cable.
Pelco Manual C2436M-B (9/02) [ 7 ] 4 Install Camera 1. Some indoor installations do not require a heater . If the installation does not require a heater , remove t he heater board from the cam- era assembly . T o remove the heater apply pressure and press on the corner of the board.
[ 8 ] Pelco Manual C2436M-B (9/02) ADJUSTMENTS (COLOR CAMERA ONL Y) If you have a color camera, it is set up at the factory and normally requires no adjustments. Sometimes, however , adjustments may be necessary . 1. Remove the dome and trim ring using the supplied 1/8-inch hollow screwdriver bit.
Pelco Manual C2436M-B (9/02) [ 9 ] F ocus Adjustment for Fix ed F ocal Length Lens with Auto Iris To adjust the focus, it may be necessary to remove the heater board in order to loosen the locking screw on the bottom of the lens. To remove the heater board: 1.
[ 10 ] Pelco Manual C2436M-B (9/02) Switch Settings f or V arifocal Lens The high resolution camera with varifocal lens and auto iris is configured at the factory for optimal performance in lighting conditions where auto iris is required. It is also configured with the shutter speed set at 1/60 (NTSC) or 1/50 (P AL) and AGC set at 6 dB of gain.
Pelco Manual C2436M-B (9/02) [ 11 ] SPECIFICA TIONS Electrical Input V oltage: 12 VDC or 24 V AC, ± 10% Power Consumption: 13 watts or less Vi deo Connector: BNC Operating Te mperature: -50 ° to 122 ° F (-46 ° to 50 ° C) De-ices to -10 ° F (-23 ° C) General Cable Entry: 3/4-inch (1.
[ 12 ] Pelco Manual C2436M-B (9/02) REVISION HISTOR Y Manual # Date Comments C2436M 9/01 Original version. C2436M-A 7/02 Added instructions for fixed lens with auto iris. C2436M-B 9/02 Revised installation instructions – bracket and camera assembled at factory.
An important point after buying a device Pelco ICS-DO101ABK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ICS-DO101ABK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ICS-DO101ABK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ICS-DO101ABK you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ICS-DO101ABK will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ICS-DO101ABK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ICS-DO101ABK.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ICS-DO101ABK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ICS-DO101ABK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
