Instruction/ maintenance manual of the product HT10 Pelco
Go to page of 4
C421M-D (2/00) HT10 Series Liquid-Cooled Enclosure ® IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
IMPORT ANT : Check coolant flow rate periodically to ensure that sediment or deposits are not restricting flow . This will pre- vent heat from building up in the enclosure, or steam from devel- oping in the water jacket.
SPECIFICA TIONS MECHANICAL Cooling Pipe Connections: Standard 3/8-inch NPT pipe fittings Suggested Operating Pressure: 35 psi, approximately 2.3 gallons/minute Cooling Jacket V olume: Approximately 3 gallons GENERAL Construction: T ype 304 stainless steel Finish: Silver-gray paint V iewing W indow HT10V : .
® Pelco, the Pelco logo, Spectra, Genex, Legacy, and Intercept are registered trademarks of Pelco. ™ Esprit is a trademark of Pelco. ® V ycor is a registered trademark of Corning Glass Works.
An important point after buying a device Pelco HT10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco HT10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco HT10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco HT10 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco HT10 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco HT10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco HT10.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco HT10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco HT10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
