Instruction/ maintenance manual of the product HS4514-2 Pelco
Go to page of 8
Pelco Manual C1472M-C (10/05) 1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be obser ved. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2 Pelco Manual C1472M-C (10/05) INST ALLA TION The follo wing items are supplied: 1 HS4514 Series enclosure 1 #10 socket for tamper-resistant screws (1/4-inch drive tool not provided) 1 Three-pin plug with leads (included with heater -1/-2/-3 models) 2 1/4-20 Phillips head screws (to mount enclosure) 1 Steel eyebolt Enclosur e Mounting 1.
Pelco Manual C1472M-C (10/05) 3 Enclosur e Power If the enclosure does not hav e a heater (model HS4514), proceed to the Camera Mounting section. If your enclosure has a heater (models HS4514-1/-2/-3), f ollow the steps below . 1. Add the camera’ s wattage to the wattage of the heater .
4 Pelco Manual C1472M-C (10/05) NOTE: THE MODEL NUMBERS OF OPTIONAL ACCESSORIES MA TCH ENCLOSURE INPUT VOL T AGE NUMBER SYSTEM. XXXX – 1 IS 120 V AC – 2 IS 24 V AC – 3 IS 230 V AC OPTIONAL CAMER.
Pelco Manual C1472M-C (10/05) 5 Camera Mounting 1. Attach the camera to the sled with the 1/4-20 Phillips-head screws that are provided in the par ts bag. Attach the camer a so that it is inside the “U” shape of the sled. 2. Install the sled and camera in the enclosure: a.
6 Pelco Manual C1472M-C (10/05) b. Wire the lens controller to the 10-connector INPUTS terminal on the circuit board as follows: Lens Common Connector 1 Preset Common Connector 5 Focus Connector 2 Pre.
Pelco Manual C1472M-C (10/05) 7 TROUBLESHOOTING If you need to troub leshoot the circuit board or wiring, refer to Figure 1, HS4514 Series Input Wiring Diagram, and Figure 2, Circuit Board Component Locations. After the enclosure is mounted, opening the enclosure is more convenient using the following procedure: 1.
REVISION HISTOR Y Manual # Date Comments C1472M 7/98 Or iginal version. 10/98 Revised certifications. C1472M-A 7/99 Revised cer tifications. Added Service Manual information to Maintenance section. Updated to new f ormat. C1472M-B 6/05 Removed agency logos from cov er; updated warranty and return information.
An important point after buying a device Pelco HS4514-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco HS4514-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco HS4514-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco HS4514-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco HS4514-2 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco HS4514-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco HS4514-2.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco HS4514-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco HS4514-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
