Instruction/ maintenance manual of the product HS2000 Pelco
Go to page of 12
HS2000 Series High-Security Enclosures INSTALLATION C494M-D (1/96).
2 C494M-D (1/96) Important Safeguards and W arnings Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
C494M-D (1/96) 3 Description The HS2000 high security camera enclosure is designed for indoor “corner mount” installation for such applications as elevators, parking garages, classrooms, offices, detention cells, etc., requiring maximum protection from vandalism in an unobtrusive package.
4 C494M-D (1/96) Installation Before installing the HS2000 to a wall, make certain that the mounting surface is able to support the full weight of the enclosure plus the camera and lens. The tilt table and tilt table mounting brackets may be removed to provide adequate clearance for mounting the enclosure.
C494M-D (1/96) 5 HS2000 Mounting T emplate.
6 C494M-D (1/96) (This page intentionally left blank.).
C494M-D (1/96) 7 TAMPER SWITCH INSTALLATION The HS2000 enclosure comes standard from the factory with a tamper switch installed. Should it become necessary to install a replacement switch, refer to Figure 1 for the correct position of the bracket/switch and perform the following steps: 1.
8 C494M-D (1/96) Exploded Assembly Diagram Figure 2. HS2000 Exploded Assembly Diagram.
C494M-D (1/96) 9 Mechanical Parts List for HS2000 Enclosure Item No. Qty Description Part Number 11 Bracket, Switch, Break-In HS10004313COMP 21 Window , 8" x 7" x .
10 C494M-D (1/96) Specifications Mechanical Window 1/4" (6.35 mm) thick impact and abrasion resistant clear Lexan Camera Mounting Adjustable tilt table Maximum Camera/Lens Size Accepts camera/lens combinations (including BNC connector) up to 3.0" H x 3.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco HS2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco HS2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco HS2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco HS2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco HS2000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco HS2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco HS2000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco HS2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco HS2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
