Instruction/ maintenance manual of the product HK4024 Pelco
Go to page of 4
C2415M (11/99) BK4000 Series Blower Kit HK4000 Series Heater Kit ® IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified ser vice personnel and conf or m to all local codes.
INST ALLA TION The following cable sizes are the minimum recommended for use with the combination of blower/heater/camera. Power Model Number Input V olta ge Consumption Cable Size Cable Distance EH4014-1/ 120 V AC 44 watts 22 A WG 1,013 ft (308.8 m) EH4018-1 20 A WG 1,612 ft (491.
Blower Kit If you are installing the b lower kit in conjunction with a heater kit, skip this section and ref er to Blower and Heater Kits (Dual Installation). To install a b lower kit, perf orm the following steps: 1. Attach the blower assembly onto the bracket at the rear of the camera sled using the hardware provided (see Figure 1).
P elco, the P elco logo , Camclosure, Esprit, Gene x, Legacy , and Spectra are registered trademarks of Pelco . ©Copyright 1999, P elco . Endura and ExSite are trademarks of P elco . All rights reser ved. REVISION HISTOR Y Manual # Date Comments C2415M 11/99 Original version.
An important point after buying a device Pelco HK4024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco HK4024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco HK4024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco HK4024 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco HK4024 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco HK4024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco HK4024.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco HK4024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco HK4024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
