Instruction/ maintenance manual of the product EU3512-3X Pelco
Go to page of 12
INST ALLA TION EU3512-3X Environmental Enclosure and Light Duty W all Mount C2428M-B (1/06).
.
C2428M-B (1/06) 3 Important Safety Instructions Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Only use attachments/accessories specifi ed by the manufacturer.
4 C2428M-B (1/06) Description The EU3512-3X is an indoor/outdoor light-duty camera enclosure and light-duty wall mount. The enclosure includes a sun shroud and 230 VAC heater and defroster. The wall mount has an adjustable tilt table allowing for mechanical positioning of the enclosure.
C2428M-B (1/06) 5 I nstallation INST ALL WALL MOUNT 1. Drill holes in mounting surface using the mount as a template and attach the mount securely with the recommended fasteners. • If you are attaching the mount to a solid surface, use the two top outside holes and the bottom center hole.
6 C2428M-B (1/06) CAMERA AND LENS INST ALLA TION 1. T o install the camera and lens onto the enclosure sled: a. Extend the lens to the maximum length. b. Position the camera and lens so that they do not extend beyond the track. c. Fasten the camera and lens to the sled with the two, 1/4-20 x 0.
C2428M-B (1/06) 7 Figure 1. Wiring Diagram T able A. Heater and Defroster Wiring Distances The following cable sizes are the minimum recommended for use with the heater and defroster . WARNING: When using a single power source for both camera and accessories, consider the camera power consumption when determining the wire gauge.
8 C2428M-B (1/06) Example: An enclosure that requires 30 V A and is installed 94 feet (28 m) from the transformer would require a minimum wire gauge of 20 AWG.
C2428M-B (1/06) 9 Specifications ENCLOSURE Camera Mounting Multiple holes on adjustable camera sled; camera sled mounts in threaded strip for easier removal and can be inverted for additional camera elevation Camera and Lens Size Accommodates camera and lens combinations (including BNC connector) 2.
10 C2428M-B (1/06) Figure 2. Enclosure Dimension Drawing Figure 3. Mount Dimension Drawing NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE IN INCHES. 12.75 (32.38) 11.25 (28.57) 2.0 (5.08) 14.75 (37.47) 3.8 (9.86) 5.1 (13.0) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE IN INCHES.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco EU3512-3X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EU3512-3X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EU3512-3X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EU3512-3X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EU3512-3X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EU3512-3X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EU3512-3X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EU3512-3X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EU3512-3X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
