Instruction/ maintenance manual of the product EH8100 Pelco
Go to page of 12
® INSTALLATION/OPERATION C1407M-H (1/07) EH8100 Series Pressurized Camera Enclosure.
2 C1407M-H (1/07) Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description .
C1407M-H (1/07) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed al l warnings. 4. Follow all instructions.
4 C1407M-H (1/07) Description Enclosures in the EH81 00 Series are sealed and pr essurized. They will accept CCD came ras with fixed focal length or motorized z oom lenses.
C1407M-H (1/07) 5 Figure 1. EH8100 Series Encl osure - Rear View Figure 2. EH8100 Series Enclosure - Wiring Diagram SCHRAEDER VALVE SPIRAL RETAINING SPRING RETAINING SPRING END PRESSURE RELIEF VALVE T.
6 C1407M-H (1/07) MATING CONNECTOR ASSEMBLY T o assemble the 16-pin mating connector , perform the following steps: 1. Discard the white plas tic sleeve that is included with the connector a ssembly . Threa d the cable through the compression nut/strain re lief and co nnector she ll.
C1407M-H (1/07) 7 RECHARGING THE ENCLOSURE Y ou may use your own chargi ng equipment or Pelco’ s EH80 00RKIT to recharge the enclosur e. If you are using yo ur own equipment, a dj ust the regulator for an ou tput pressure of 12 psi (83 kPa).
8 C1407M-H (1/07) Servicing DISASSEMBLY 1. Disconnect the powe r from the enclosure . 2. Remove th e mating conn ector fro m the rear of the en closure by turning th e outer ri ng counte rclockwise unt il a click is felt; th en pull the mating portion of the conn ector off.
C1407M-H (1/07) 9 Specifications Electrical Input V oltage 120 V AC (230 V AC optional) for heaters Power Require ments 40 watts (EH8 104) 80 watts (EH8 106) Connector 16-pin recept acle with jam nut Mating Conne ctor MS-type connec tor (supplie d) Maximum Cable Distan ces 120 V AC EH8104 EH8106 16 AWG (1.
10 C1407M-H (1/07) Environmental Ambient Oper ating T emperatu re -40° to 1 22°F (-40° to 50°C) (with he ater) Vibr ation 5 to 60 Hz with 0.082-in ch total travel (15 g’ s at 60 Hz).
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without char ge, any merchandise proved defective in material or workmanship for a period of one year after the date of sh ipment.
® W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco EH8100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EH8100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EH8100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EH8100 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EH8100 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EH8100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EH8100.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EH8100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EH8100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
