Instruction/ maintenance manual of the product EH8000 Pelco
Go to page of 16
EH8000 Series Pr essurized Camera Enclosures Installation/ Operation Manual C418M (8/97) ® Pelco • 300 W. Pontiac Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981 FAX (800).
16 Pelco Manual C418M (8/97) ii T ABLE OF CONTENTS Section Page 1.0 SCOPE .............................................................................................................................................. 1 1.1 W ARNINGS ..................
Pelco Manual C418M (8/97) 1 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. 4. Only use replacement parts recommended by Pelco.
2 Pelco Manual C418M (8/97) 2.1 MODEL NUMBERS EH8004 4" (10.16 cm) diameter, 17" (43.18 cm) long pressurized camera enclosure with lens pre- set capabilities. Provided with one (1), 40 watt heater. EH8006 6" (15.24 cm) diameter, 20" (50.
Pelco Manual C418M (8/97) 3 3.0 SPECIFICA TIONS ELECTRICAL Input Voltage: 120 VAC (230 VAC optional) for heaters Power Requirements: 40 watts (EH8004) 160 watts (all other models) Connector: Souriau 8.
4 Pelco Manual C418M (8/97) Sand and Dust: MIL-E-5400T, para. 3.2.24.7. Fungus: MIL-E-5400T, para. 3.2.24.8. Salt Atmosphere: MIL-E-5400T, para. 3.2.24.9. Explosion: MIL-E-5400T, para. 3.2.24.10. (Design and product specifications subject to change without notice.
Pelco Manual C418M (8/97) 5 4.2 ENCLOSURE MOUNTING — P AN/TIL T The enclosure can be mounted to a pan/tilt which is mounted to a wall or ceiling. For proper mounting, refer to the mounting instruc- tions accompanying the specific mount and pan/tilt you are using.
6 Pelco Manual C418M (8/97) 4.3 CAMERA/LENS INST ALLA TION AND ADJUSTMENTS To install the camera/lens combination, perform the following steps: 1. Disassemble the enclosure as specified in the Maintenance Section, Section 7.0. CAUTION Pressure must be released prior to opening the enclosure or per- sonal injury may result.
Pelco Manual C418M (8/97) 7 Figure 6. EH8000 Series Mating Connector Assembly Diagram.
8 Pelco Manual C418M (8/97) Figure 7. EH8000 Series Wiring Diagram, 120 VAC (16 or 11 Pin Connector).
Pelco Manual C418M (8/97) 9 Figure 8. EH8000 Series Wiring Diagram, 230 VAC (16 or 11 Pin Connector).
10 Pelco Manual C418M (8/97) 4.5 SUN SHROUD INST ALLA TION The sun shroud provides an air space between itself and the enclosure to protect the enclosure from the direct rays of the sun and reduces the internal temperature of the enclosure approxi- mately 10-15 ° F (-12.
Pelco Manual C418M (8/97) 11 CAUTION: Pressure must be released prior to opening the enclosure or personal injury may result. 5. Once the internal pressure has been relieved, use a screwdriver to pry the end of the spiral retaining ring (Figure 10, item 5) from the re- taining ring groov e in the enclosure body .
12 Pelco Manual C418M (8/97) 8.0 EXPLODED ASSEMBL Y DIAGRAM Figure 10. EH8000 Series Enclosures Exploded Assembly Diagram 9.0 EH8000 SERIES ENCLOSURES MECHANICAL P AR TS LIST The following parts lists correspond to Figure 10. EH8004 MECHANICAL PARTS LIST I tem No.
Pelco Manual C418M (8/97) 13 EH8006, EH8006-26 MECHANICAL PARTS LIST Item No. Qty. Description Part Number 1 1 Connector, solder receptacle jam nut CON85107E2016P 2 2 Strap, cradle E7064004COMP 3 1 Cradle enclosure E7084003COMP 4 1 Glass, 6.100" diameter x .
14 Pelco Manual C418M (8/97) 11.0 WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or work- manship for a period of one (1) year after the date of shipment.
An important point after buying a device Pelco EH8000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EH8000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EH8000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EH8000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EH8000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EH8000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EH8000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EH8000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EH8000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
