Instruction/ maintenance manual of the product EH5700L Pelco
Go to page of 12
EH5700L Legacy ® Series Envir onmental Enclosur e Installation/ Operation Manual C1422M-D (8/05) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.
2 Pelco Manual C1422M-D (8/05) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 3 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 3 2.0 DESCRIPTION .
Pelco Manual C1422M-D (8/05) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
4 Pelco Manual C1422M-D (8/05) 2.0 DESCRIPTION Environmental enclosures in the EH5700L Legacy ® Series are used with Pelco’s PT780 Series pan/tilt unit. The enclosures are constructed of aluminum. Y ou can install cameras with either fixed focal length lenses or motorized zoom lenses.
Pelco Manual C1422M-D (8/05) 5 3.0 INST ALLA TION 1. Unlatch and raise the enclosure lid. The gas spring will hold the lid in place when it is fully opened. 2. Remove the camera sled from the rail: a. Loosen the screws. b . Slide the sled so that the screws are in the large part of the mounting slots.
6 Pelco Manual C1422M-D (8/05) A B C 5 C 4 D B 3 A B RED 22 GA. (1 FT .) BLACK 22 GA. (1 FT .) TO PC BOARD TO FAN 2 1 24 V AC MODELS Figure 1. Exploded Assembly Diagram for Blower 5 . Install the sled and camera/lens in the enclosure: a. If the camera’s lens is adjustable, extend the lens to its maximum length.
Pelco Manual C1422M-D (8/05) 7 9. Wire power from the circuit board to the camera (refer to Figure 2). There are two ways to supply power to the camera: when the power require- ments for the camera an.
8 Pelco Manual C1422M-D (8/05) KIT # BK57-2 KIT # BK57-1 (120 V) KIT # BK57-3 (230 V) FA N 24 VDC FA N 120/230 V PCB 9 000277ASSY RED BLK RED BLK 1 2 PLUG 1 2 PLUG BLK BLK PLUG 1 2 3 4 WHT WHT RED HEA.
Pelco Manual C1422M-D (8/05) 9 4.0 OPERA TION If your enclosure has a thermostatically controlled blower , the thermostat is set to turn the fan on between 77 ° and 93 ° F (25 ° and 34 ° C) and to turn the fan off be- tween 62 ° and 78 ° F (17 ° and 26 ° C).
10 Pelco Manual C1422M-D (8/05) 6.0 SPECIFICA TIONS ELECTRICAL Input Voltage: 24, 120 or 230 VAC, 50/60 Hz Electrical Connections: One each of the following: 3-connector terminal block for power input.
Pelco Manual C1422M-D (8/05) 11 Figure 3. EH5700L Dimension Drawing NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES Weight Unit Shipping EH5723L: 12.5 lb (5.68 kg) 14 lb (6.37 kg) EH5723L- 1 , -2, -3: 1 4 l b (6.37 kg) 16 lb (7.28 kg) EH5729L: 17 lb (7.
12 Pelco Manual C1422M-D (8/05) 7.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 2005, Pelco. All rights reserved.
An important point after buying a device Pelco EH5700L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EH5700L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EH5700L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EH5700L you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EH5700L will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EH5700L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EH5700L.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EH5700L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EH5700L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
