Instruction/ maintenance manual of the product EH4018-1/-2 Pelco
Go to page of 16
PELCO Manual C430M-E (1/95) 13 EH4014/EH4018 Series Camera Enclosur es Installation/Operation Manual C430M-E (1/95) ® PELCO • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.
TABLE OF CONTENTS S ection P age 1.0 WARNINGS .................................................................................................................. ....................... 1 2.0 SCOPE ......................................................
REVISION HISTOR Y Manual # Date Comments C430M 1 1/88 Original version. C430M 4/90 R e v . A . Added EH4014-1/-2, EH4014/BR, EH4014/CH, EH4014/CP , EH4018-1/-2, and BK4000/BK4024 models. Fig- ure 2 revised to show current design. Sections 4.2.1 and 4.
(This page intentionally left blank.) iv PELCO Manual C430M-E (1/95).
PELCO Manual C430M-E (1/95) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
2 PELCO Manual C430M-E (1/95) Figure 1 . EH4014/EH4018 Dimension Drawing 2.0 SCOPE The information contained within this manual covers the EH4014/EH4018 Series camera enclosures.
PELCO Manual C430M-E (1/95) 3 3.1 MODELS EH4014 Enclosure, indoor/outdoor extruded aluminum construction for 2/3" cam- eras and fixed focal length lenses up to 12" long. (UL, CE) EH4014-1 Same as EH4014 except maximum camera/lens length is 10.
4 PELCO Manual C430M-E (1/95) 3.3 RECOMMENDED CABLE SIZE CAUTION : When using a single power source for both the camera and accessories, the camera power consumption must be taken into consideration when determining wire gauge. The following cable sizes are the minimum recom- mended for use with the combination of blower/heater/ camera.
PELCO Manual C430M-E (1/95) 5 3.4 SPECIFICA TIONS MECHANICAL Camera Mounting: Multiple holes on camera sled Camera Size: Accommodates camera/lens combi- nations up to: 5.25" W x 3.50" H x (EH4014) 12.00" L (EH4018) 16.00" L (EH4014-1/EH4014-2/EH4014-3) 10.
6 PELCO Manual C430M-E (1/95) 8. Replace the two (2) Phillips head screws. IMPORT ANT : When reinstalling the front or rear of the enclosure, make sure the end caps are firmly seated against the enclosure to in- sure proper sealing. 9. Attach the enclosure to the appropriate mount or pan/tilt using the instructions provided.
PELCO Manual C430M-E (1/95) 7 4.2 HEA TER KIT INST ALLA TION Refer to Section 2.4, Recommended Cable Size, to de- termine cable size needed for installation. T o install the heater and/or blower kits perform the following steps (refer to Figure 2): 1.
8 PELCO Manual C430M-E (1/95) Figure 3 . Heater/Blower Wiring Diagram 120 V AC (BK4000) Fan Fan Fan Butt Splices Provided Resistor 230 V AC (BK4220) Diode Bridge Blower Wiring Installation only .
PELCO Manual C430M-E (1/95) 9 Figure 4 . Sun Shroud Installation 4.5 SUN SHROUD INST ALLA TION The sun shroud protects the enclosure from the direct rays of the sun and reduces internal temperature by approximately 10-15 ° . T o install the sun shroud, per- form the following steps (refer to Figure 4).
10 PELCO Manual C430M-E (1/95) Figure 5 . EH4014/EH4018 Exploded Assembly Diagram 6.0 EXPLODED ASSEMBL Y DIAGRAM/ P ARTS LIST The following parts list corresponds to the exploded assembly diagram in Figure 5.
PELCO Manual C430M-E (1/95) 11 7.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
12 PELCO Manual C430M-E (1/95) ® PELCO 3500 Pelco Way • Clovis, CA 93612-5699 • www.pelco.com (559) 292-1981 • (800) 289-9100 • FAX (559) 292-3827 or (800) 289-9150 International customers call 1-559-292-1981 or FAX 1-559-348-1120 (Product specifications subject to change without notice.
An important point after buying a device Pelco EH4018-1/-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EH4018-1/-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EH4018-1/-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EH4018-1/-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EH4018-1/-2 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EH4018-1/-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EH4018-1/-2.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EH4018-1/-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EH4018-1/-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
