Instruction/ maintenance manual of the product EH3515K Pelco
Go to page of 8
EH3515L Legacy ® Series Envir onmental Enclosur e Installation/ Operation Manual C1469M-B (7/99) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.
2 Pelco Manual C1469M-B (7/99) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION ....................................................................................
Pelco Manual C1469M-B (7/99) 3 IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
4 Pelco Manual C1469M-B (7/99) INST ALLA TION The following parts are supplied: 1 EH3515 enclosure 2 1/4-20 Phillips screws 1 Three-pin plug with wires 1T wo-pin plug with wires 1 5/32-in. Allen wrench 2 10-32 x 1-in. Allen screws 1T ube of Loctite ® threadlocker 1 Loctite ® application instructions (C1447M) 1.
Pelco Manual C1469M-B (7/99) 5 8. Wire power from the circuit board to the camera. There are two ways to supply power to the camera: when the power requirements for the camera and enclosure’s access.
6 Pelco Manual C1469M-B (7/99) F AN AND DEFROSTER P5 WIRING FOR LEGACY (EH3515L) MODELS ONL Y ENCLOSURE CIRCUI T BOARD REFER TO FIGURE 2 FOR COMPONENT LOCA TIONS Figure 1. EH3515L Series Wiring Diagram TROUBLESHOOTING If you need to troubleshoot the circuit board or wiring, refer to Figures 1-3.
Pelco Manual C1469M-B (7/99) 7 Figure 3. Layout of Circuit Board T races Figure 2. Circuit Board Component Locations MAINTENANCE Regularly scheduled maintenance prolongs the operational life and appearance of the equipment. Clean the window regularly with a soft cloth using a mild, nonabrasive detergent and water to maintain picture clarity .
8 Pelco Manual C1469M-B (7/99) ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. REVISION HISTOR Y Manual # Date Comments C1469M 6/97 Original version. C1469M-A 6/99 Revised installation instructions.
An important point after buying a device Pelco EH3515K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EH3515K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EH3515K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EH3515K you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EH3515K will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EH3515K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EH3515K.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EH3515K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EH3515K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
