Instruction/ maintenance manual of the product EH3512 Pelco
Go to page of 8
EH3508/EH3512/ EH3515 Series Envir onmental Enclosur e Installation/ Operation Manual C478M-L (11/03) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
2 Pelco Manual C478M-L (1 1/03) IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and con- form to all local codes.
Pelco Manual C478M-L (1 1/03) 3 EH3512-3 Same as EH3512 except unit is supplied with 230 V AC heater, defroster , and blower , 22 watts. EH3512-3HD Same as EH3512 except unit is supplied with 230V AC heater and defroster, 13 watts. EH3515 Enclosure, indoor/outdoor , 15.
4 Pelco Manual C478M-L (1 1/03) 7. Pull the video and power cables through the glands or conduit on the bottom of the en- closure. Refer to T ables A and B to determine the size of power wire to use. Refer to T able C for the type of video coaxial cable to use.
Pelco Manual C478M-L (1 1/03) 5 Figure 3. EH3515-1/-1HD/-2/-2HD/-3/-3HD Wiring Diagram 1 2 3 4 5 6 7 8 9 10 INPUT , AC HIGH INPUT , AC LOW (NEUTRAL) GROUND 120 V AC MODEL DEFROSTER BLOWER REAR HEA TER.
6 Pelco Manual C478M-L (1 1/03) T able C. V ideo Coaxial Cable Wiring Distances Cable T ype* Maximum Distance RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m) * Minimum cable requi.
Pelco Manual C478M-L (1 1/03) 7 OPERA TION If your enclosure has a thermostatically controlled heater , the thermostat is set to turn on at 50 ° F (10 ° C) and to turn off at 80 ° F (27 ° C). If your enclosure has a blower and/or defroster , they operate continuously .
8 Pelco Manual C478M-L (1 1/03) REVISION HISTOR Y Manual # Date Comments C478M-H 6/97 Rev H. Revised to include new models (EH3515, EH3515-1, EH3515-2, EH3515-3). C478M-I 8/98 Removed installation instructions for heater and blower kits, which have a separate manual.
An important point after buying a device Pelco EH3512 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EH3512 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EH3512 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EH3512 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EH3512 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EH3512, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EH3512.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EH3512. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EH3512 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
