Instruction/ maintenance manual of the product ED2500 Pelco
Go to page of 20
ED25/ED2500/ED2620/ED27 Series Envir onmental Domes Installation/Operation Manual C437M-B (9/95) ® PELCO • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.
TABLE OF CONTENTS Section Page 1.0 WARNINGS ....................................................................................................................................... 1 2.0 SCOPE ...........................................................
PELCO Manual C437M-B (9/95) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 4 . Only use replacement parts recommended by PELCO.
2 PELCO Manual C437M-B (9/95) ED25/26 Series ED27 Series 2.0 SCOPE The information contained in this manual covers the ED25/ED2520/ED2620/ED27/ED2720 Series Environ- mental Domes. 2.1 DESCRIPTION The ED25/ED2520/ED2620/ED27/ED2720 Series of environmental domes have been designed primarily for outdoor applications, but also can be used indoors.
PELCO Manual C437M-B (9/95) 3 3.0 INST ALLA TION CAUTION: Make certain that the mounting surface is capable of supporting the full load of the mount, pan/tilt, camera/lens and enclosure • Handle the lower dome with care so as not to scratch or get fingerprints on the viewing window .
4 PELCO Manual C437M-B (9/95) 3.1.2 PMED25 Pendant Mount Installation T o mount the enclosure using the PMED25 pendant mount, perform the following steps.
PELCO Manual C437M-B (9/95) 5 3.3.2 Conductor Requirements The ED25/ED2520/ED27 Series environmental domes can be connected by a “hard-wire” system, Coaxitron or W iretron system. The ED2620 Series dome is de- signed for hard-wire applications only .
6 PELCO Manual C437M-B (9/95) Figure 5 . ED2520/ED2720 Series Receiver/Driver Wiring Diagram.
PELCO Manual C437M-B (9/95) 7 Figure 6 . Wiring Diagram for ED2620/ED2620-SL Dome Drives ED2620/ED2620-SL Pan/Tilt Wiring Diagram Qty Sym Description Part Number 1 C1 Capacitor, 15 MFD 100 V CAPU0015.
8 PELCO Manual C437M-B (9/95) Figure 8 . Wiring Diagram for ED2520-SL/ED2720-SL Dome Drives Figure 7 . Wiring Diagram for ED2520/ED2720 Dome Drives.
PELCO Manual C437M-B (9/95) 9 Figure 10 . Wiring Diagram ED2520SL-PP/ED2720SL-PP Dome Drives Figure 9 . Wiring Diagram for ED2520-PP/ED2720-PP Dome Drives.
10 PELCO Manual C437M-B (9/95) 3.3.3 Video Synchr onization, Alarm T er minal Diagram The following wiring diagram illustrates the configu- ration of an additional four-position and six-position alarm terminal strip and additional video synchroniza- tion connection.
PELCO Manual C437M-B (9/95) 11 4.0 P AN/TIL T LIMIT ADJUSTMENTS CAUTION: DO NOT attempt to adjust limit stops when the pan/tilt is in operation. Damage to the equipment can result. Do not operate equipment without limit stops. T o adjust limit stops, perform the following steps: 1.
12 PELCO Manual C437M-B (9/95) 6.0 SERVICE AND REP AIR 6.1 RECOMMENDED EQUIPMENT AND TOOLS 1. V oltmeter or ohmmeter 2. Allen wrench set 3. W rench set 4. Screwdriver 5. Pliers, long nose 6.2 SERVICE TIPS Some common problems encountered with pan/tilt sys- tems include mis-wiring, overloading, and not using the units for the correct application.
PELCO Manual C437M-B (9/95) 13 Figure 14 . ED25/ED26/ED27 Series Enclosure Exploded Assembly Diagram 7.0 EXPLODED ASSEMBL Y DIAGRAM.
14 PELCO Manual C437M-B (9/95) 8.0 MECHANICAL P AR TS LIST The following parts list corresponds to the exploded assembly diagram in Figure 14. Item Quantity Description Part Number 1 1 Enclosure front.
PELCO Manual C437M-B (9/95) 15 10.0 MODELS ED25 14" diameter environmental dome fixed camera mount. Black opaque lower dome has smoked viewing win- dow (1 f-stop light loss). (CE) ED25-1 Same as ED25 except supplied with service light and heater/blower.
16 PELCO Manual C437M-B (9/95) Enclosure The following specifications apply to these models: ED25-1, ED2520, ED2520-SL, ED2520-PP, ED2520SL-PP, ED2620, ED2620-SL, ED27-1, ED2720, ED2720-SL, ED2720SL-PP Input Voltage: 120 VAC, 50/60 Hz vA Required: 187 vA Blower: 80 cfm at 13 watts (continuous operation) Heate rs: Four (4) at40 watts each.
PELCO Manual C437M-B (9/95) 17 GENERAL Enclosure Max. Camera/Lens Length: 12.50"L x 4.50"W x 3.25"H (31.75cm x 11.43cm x 8.25cm) Construction: Back Box 0.080" aluminum Viewing Window Optically clear acrylic which has been tinted, rated UL94HB.
18 PELCO Manual C437M-B (9/95) 12.0 WARRANTY AND RETURN INFORMATION This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE).
An important point after buying a device Pelco ED2500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ED2500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ED2500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ED2500 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ED2500 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ED2500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ED2500.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ED2500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ED2500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
