Instruction/ maintenance manual of the product ECM100 Pelco
Go to page of 4
Worldwide Headquarters • 3500 Pelco W ay • Clovis, California 93612 USA • www .pelco.com USA & Canada • T el: 800/289-9100 • Fax: 800/289-9150 International • T el: 1-559/292-1981 • Fax: 1-559/348-1120 Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.
EPM ESPRIT POLE MOUNT 1. Thread wiring/cabling through the hole in the pole mount and attach the mount to the pole with three stainless steel straps (supplied). 2. Attach the gasket to the end of the EWM. 3. Remove the knockouts from the conduit plate.
EPP ESPRIT PEDESTAL ADAPTER 1. Route the wiring/cabling through the pedestal mount and the EPP pedestal adapter . 2. Attach the pedestal adapter to the mount with appropriate hardware (not supplied). 3. Complete the Esprit system installation following the instructions supplied with the equipment.
4.75 (12.07) 6.00 (15.24) Ø 0.37 (0.94), 8X 0.60 (1.52) 8.00 (20.32) 2.00 (5.08) ECM100 3.58 (9.09) Ø3.00 ECM100 0.8 X 0.375 (2.03 X 0.95) 6.00 (15.24) 0.25 (0.64) 1.50 (3.81) 4.75 (12.06) Ø 0.150 (0.381) 3X 3.00 (7.62) B.C. EPP Ø 3.00 (7.62) 7.00 (17.
An important point after buying a device Pelco ECM100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ECM100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ECM100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ECM100 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ECM100 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ECM100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ECM100.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ECM100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ECM100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
