Instruction/ maintenance manual of the product E708-24 Pelco
Go to page of 4
C415M-J (11/99) E700 Series Dust-Tight Enclosure ® IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified ser vice personnel and conform to all local codes.
INST ALLA TION Camera and Lens T o install the camera and lens , perform the f ollowing steps: 1. Unsnap the two latches holding the rear end plate on the enclosure and slide the camera sled out. 2 . Place the camera and lens at the maximum f orward position on the sled.
Enclosur es with Purge Fittings Purge fittings create internal positive pressure, keeping external contaminants from entering the enclosure. Proper installation requires a filtered compressed air supply up to 35 psi at 10 cfm. A refrigerated air supply will provide additional cooling f or the enclosure.
P elco, the P elco logo , Camclosure, Esprit, Genex, Legacy , and Spectra are registered trademarks of Pelco . © Copyright 1999, P elc o. All r ights reserved. Endura and ExSite are trademarks of P elco. Lucite is a registered trademark of DuP ont. REVISION HISTOR Y Manual # Date Comments C415M-H 5/96 Revision H.
An important point after buying a device Pelco E708-24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco E708-24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco E708-24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco E708-24 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco E708-24 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco E708-24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco E708-24.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco E708-24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco E708-24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
