Instruction/ maintenance manual of the product DX7100 Pelco
Go to page of 8
C1671M (5/05) Digital Video Recorder DX7100 DX7100 Series Recovery Instructions.
.
C1671M (5/05) 3 DX7100 Recovery Procedure The DX7100 recovery procedure describes how to recover your DX7100 software using the DX7100 Recovery CD. To recover DX7100 software using the DX7100 Recovery CD: 1. Insert the DX7100 Recovery CD into the CD-ROM drive of the DX7100 Series digital video recorder (DVR).
4 C1671M (5/05) 5. Scroll down to Advanced BIOS Features, and then press the Enter key . 6. The Advanced BIOS Features dialog box opens. Scroll down to First Boot Device.
C1671M (5/05) 5 7. Press the Enter key . The First Boot Device dialog box opens. Scroll down to CDROM, and then press the Enter key to make the CD-ROM the first boot device. 8. Repeat steps 6 and 7 for the second and third boot devices. Select SCSI for the second boot device, and select HDD-0 for the third boot device.
6 C1671M (5/05) 12. A message appears telling you to “Press any key to boot from CD.” Press the Enter key to start the reimaging tool. Wait a few minutes until the Pelco Recovery T ool dialog box opens. 13. If you want to proceed with the recovery process, type YES in the text box, and then click OK.
C1671M (5/05) 7 16. In the CMOS Setup Utility , select Advanced BIOS Features. Press the Enter key. 17. In the First Boot Device dialog box, scroll to HDD-0 and then press the Enter key to make the hard drive the first boot device. 18. Press the F10 key to save the change.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco DX7100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DX7100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DX7100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DX7100 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DX7100 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DX7100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DX7100.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DX7100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DX7100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
