Instruction/ maintenance manual of the product dx7000 Pelco
Go to page of 12
DX7000 Series Digital V ideo Recorder C664M-B (8/02) ® INST ALLA TION MANUAL.
2 C664M-B (8/02) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 3 WELCOME ..
C664M-B (8/02) 3 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
4 C664M-B (8/02) WELCOME Thank you for purchasing Pelco’ s DX7000 Series, high-quality digital video recorder (DVR). Y our new system combines the functions of a recorder and multiplexer into a product with versatile recording and playback functions.
C664M-B (8/02) 5 Figure 1. Rack Ear Installation IMPORT ANT : Slots and openings in the cabinet provide ventilation and prevent it from overheating. Do not block these openings.
6 C664M-B (8/02) BACK P ANEL LA YOUT Figure 2. Back Panel Layout 1 Camera Inputs – 8 or 16 BNC camera inputs 2 Alarm Inputs – 8 normally closed dry contact inputs 3 Analog Monitor Output – One B.
C664M-B (8/02) 7 BASIC INST ALLA TION Basic installation covers all the equipment necessary to program and operate the system. Refer to the Extended Installation section for PTZ, alarm, sensors, and network connections.
8 C664M-B (8/02) Power Analog (spot) Monitor Network 1 1 2 2 3 3 4 4 5 5 NOTE: A standard European plug is attached to the power adapter . T o convert the adapter to the USA standard loosen the Phillips head screw and remove the European plug.
C664M-B (8/02) 9 Figure 6. Bottom View of the RS-422 Converter 2 TCP/IP Access Consult your network administrator to avoid possible network conflicts. For TCP/IP access, connect the DX7000 to a 10/100 Ethernet network. Use a standard UTP Cat5 cable with RJ-45 connectors.
10 C664M-B (8/02) SPECIFICA TIONS ELECTRICAL/VIDEO Input V oltage: 100-240 V AC switchable, 50/60 Hz Signal System: NTSC/P AL CPU and RAM DX7008: Celeron ® , 128 MB DX7016: Pentium ® III, 128 MB Res.
C664M-B (8/02) 11 W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco dx7000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco dx7000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco dx7000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco dx7000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco dx7000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco dx7000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco dx7000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco dx7000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco dx7000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
