Instruction/ maintenance manual of the product DSP Color Camera Pelco
Go to page of 12
® Installation/Operation CC3551H-2 and CC3651H-2X DSP Color Camera C1984M-F (4/03) Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.
[ 2 ] Pelco Manual C1984M-F (4/03) Prior to installation and use of this product, the following WARNINGS should be observed. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
Pelco Manual C1984M-F (4/03) [ 3 ] REGULA TOR Y NOTICES This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
[ 4 ] Pelco Manual C1984M-F (4/03) CAMERA LA YOUT Figure 1. Camera Layout INST ALLA TION Lens Mounting The camera can use a fixed iris, manual iris or auto iris lens. The camera is factory set for a CS-mount lens, but is easily adjusted for a C-mount lens.
Pelco Manual C1984M-F (4/03) [ 5 ] Figure 4. Power Supply Connections 24 V AC 12 VDC CLASS 2 ISOLA TED POWER SUPPLY CLASS 2 ISOLA TED POWER SUPPLY Camera Mounting Use a standard 1/4-20 screw (provided) with a maximum thread length of 3/8-inch (10 mm) for top or bottom camera mounting.
[ 6 ] Pelco Manual C1984M-F (4/03) AC operation only – If you are wiring more than one camera to the same transformer , connect one side of the transformer to the same terminal on all cameras, and connect the other side of the transformer to the remaining terminal on all cameras.
Pelco Manual C1984M-F (4/03) [ 7 ] LENS SETUP AND FOCUS PROCEDURES V ideo Drive Auto Iris Lens Set the lens mode selector switch to AIV . Switch the ESC OFF . Refer to the lens instructions and adjust the lens for the optimum picture (video output level of 1V peak-to-peak).
[ 8 ] Pelco Manual C1984M-F (4/03) SWITCH SETTINGS Figure 6. DIP Switch Default Settings OFF OFF OFF AW1 AIV INT NOR OFF OFF OFF BLC OPT ESC AW2 AID LL SHP LC DS1 DS2 ON PHASE LEVEL + - H L 1 2 3 4 5 6 7 8 9 10 00027 Note: White indicates switch setting.
Pelco Manual C1984M-F (4/03) [ 9 ] OFF - Disables the DSS mode. 4 Fields of Integration Maximum - 1/15-second scene update rate. 16 Fields of Integration Maximum - 1/4-second scene update rate. 30 Fields of Integration Maximum (Default setting) - 1/2-second scene update rate.
[ 10 ] Pelco Manual C1984M-F (4/03) CAMERA SYNCHRONIZA TION (AC OPERA TION ONL Y) When using more than one camera power supply , a brief vertical roll may occur on the monitor when a camera view is switched. T o eliminate vertical roll, adjust the phase control by synchronizing, or line-lock- ing, the cameras to one another .
Pelco Manual C1984M-F (4/03) [ 11 ] the vertical sync pulses of the reference camera to the selected camera(s). SPECIFICA TIONS GENERAL CCD Sensor: 1/3-inch interline transfer Picture Elements CC3551H.
[ 12 ] Pelco Manual C1984M-F (4/03) REVISION HISTOR Y Manual # Date Comments C1984M 10/00 Original version. C1984M-A 12/00 Added note for cosmetic trim ring. Revised switch setting illustration to depict default settings. C1984M-B 7/01 Added camera model CC3651H-2X.
An important point after buying a device Pelco DSP Color Camera (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DSP Color Camera yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DSP Color Camera - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DSP Color Camera you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DSP Color Camera will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DSP Color Camera, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DSP Color Camera.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DSP Color Camera. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DSP Color Camera along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
