Instruction/ maintenance manual of the product DF5 Pelco
Go to page of 16
INSTALLATION C1458M-J (9/08) DF5 Series Fixed Mount Dome.
2 C1458M-J (9/08) Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description . . .
C1458M-J (9/08) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed al l warnings. 4. Follow all instructions. 5. Do not bl ock any ven tilation openings. Ins tall in accordance with the manu facturer’ s instructions.
4 C1458M-J (9/08) Description DF5 Series domes are discr eet surveillance domes that are designed for indoor or outd oor use. Models include pend ant and in-cei ling versions. In-ceiling models have plenum-rated back bo xes and can be instal led in hard ceilings or standard 2 x 2 ft (6 x 61 cm) s uspended ceilings.
C1458M-J (9/08) 5 Installation PARTS LIST The DF5 shipp ing carton contains two boxes. Inspe ct each bo x to make sure a ll parts ar e present. IN-CEILING MODELS Back Box Qty Description 1 Back box wi.
6 C1458M-J (9/08) BACK BOX IN-CEILING MODELS, HARD CEILINGS 1. Locate th e center poin t of the moun ting locati on. Drill a hol e in the ceil ing using a 3/ 32-inch dril l. Insert the compass too l into the hole. Use a pencil and the compass t ool to dra w a circle on the ceiling.
C1458M-J (9/08) 7 IN-CEILING MODELS, SUSPENDED CEILING 1. Remove the ceiling tile from the ceil ing. Insert th e compass to ol (suppli ed) into the center of t he tile. (I f necessary, use a 3/32-inch bit to drill a hole.) Draw a circle on the tile using the compass tool and a pencil.
8 C1458M-J (9/08) PENDANT MODELS, SURFACE MOUNT 1. If you ha ve an outdo or model, remove the sun shie ld. 2. Remove th e black tilt table asse mbly inside of the back bo x by removing the nuts and washers that hold the three legs to the back box. 3. Remove th e top moun t by removin g the thre e screws and lo ck washers ins ide the b ack box.
C1458M-J (9/08) 9 CAMERA AND LENS If the camera and lens ar e already installed, begin with ste p 2. 1. If applicable, extend the lens to the ma x imum length be fore instal ling the camer a in the back box. Attach the camera to the t ilt table with the 1/4-20 scr ew , fla t washer , and lock washer (su pplied).
10 C1458M-J (9/08) LOWER DOME IN-CEILING MODELS 1. Snap the c lip on the end of the t rim ring leas h into th e hole on t he lip of th e back box. 2. Line up the snaps on the trim ring with the moun ting screws on the back box. Sn ap the trim rin g into the plastic snap washers on the mounting screws.
C1458M-J (9/08) 11 Maintenance Clean the acrylic dome as needed . Be careful not to scratch the surfaces of the dome. EXTERIOR SURFACE Clean the do me’ s exterior surface wit h a nonabr asive clean ing cloth an d agent that is safe for acrylic plastic.
12 C1458M-J (9/08) Specifications ELECTRICAL Input Voltage 24 VAC (outdoor models only) Input Power 58 V A (for heater) MECHANICAL Construction Back Box Aluminum Mounting Br acket Steel Lower Dome Acr.
C1458M-J (9/08) 13 Appendix *Cable requ irements: 75-ohm impedance All-copper ce nter conductor All-copper braided s hield with 95 % braid cove rage T able B sho ws are the rec ommended maximum di stances for 24 VAC applications an d are calculated with a 10 per cent voltage dr op.
14 C1458M-J (9/08) REVISION HISTORY Manual # Date Comments C1458M 4/97 Origi nal version. C1458M-A 7/97 Added indoor pendant models. C1458M-B 12/97 Ad ded DF5C and DF5M pen dant models. Added outdoor p endant models. Rem oved column for 2 2-gauge wire from T able B.
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Australia | Finland | France | G ermany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab Emirates | United Kingdom | United States W orldwide Headquar.
An important point after buying a device Pelco DF5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DF5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DF5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DF5 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DF5 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DF5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DF5.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DF5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DF5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
