Instruction/ maintenance manual of the product DA104DT/220 Pelco
Go to page of 4
IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified ser vice personnel and conform to all local codes.
Figure 1. D A104DT 120 V AC Input Diagr am INST ALLA TION Plug power cord into a 120 V A C , 60 Hz or 230 V AC , 50 Hz source depending on model ordered. Connect the input to a video camera with 75 ohm coax cable . Each output is capable of supplying video to more than one monitor .
OPERA TION Tu rn the po wer s witch on; a panel lamp will indicate that the unit is on. There are no adjustments necessar y for proper operation of this unit. MAINTENANCE The D A104DT requires no periodic maintenance. In the e vent of any apparent amplifier f ailure, check all cab les and connectors first.
REVISION HISTOR Y Manual # Date Comments C605M-C 6/99 Original version. C605M-C 10/04 Removed agency logos; updated warranty and return information. REGULA TOR Y NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device , pursuant to par t 15 of the FCC rules.
An important point after buying a device Pelco DA104DT/220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DA104DT/220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DA104DT/220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DA104DT/220 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DA104DT/220 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DA104DT/220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DA104DT/220.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DA104DT/220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DA104DT/220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
