Instruction/ maintenance manual of the product CX9504 Pelco
Go to page of 20
® Pelco • 3500 Pelco W ay • Clovis, CA 93612-5699 • USA • www .pelco.com (800) 289-9100 or (1-559) 292-1981 • F AX (800) 289-9150 or (1-559) 292-3827 International customers call (1-559) 29.
18 Pelco Manual C505M-B (4/97) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 1 2.0 DESCRIPTION .
Pelco Manual C505M-B (4/97) 19 LIST OF ILLUSTRA TIONS Figur e Page 1 T ypical Coaxitron Application ............................................................. 3 2 T ypical RS-485 Control Applications ................................................
20 Pelco Manual C505M-B (4/97) (This page intentionally left blank.) iv.
Pelco Manual C505M-B (4/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
2 Pelco Manual C505M-B (4/97) 2.0 DESCRIPTION The Coaxitron ® System 9500 receivers are available in two control formats and work with all Coaxitron controls.
Pelco Manual C505M-B (4/97) 3 3.0 INST ALLA TION 3.1 SELECTING THE CORRECT RECEIVER FOR YOUR APPLICA TION Successful installation must include proper application planning. The trade-offs and application hints that should be considered for each receiver type are discussed in the following subsections.
4 Pelco Manual C505M-B (4/97) Figure 2. T ypical RS-485 Control Applications 3.1.2 The CX9504 4-Wire RS-485 Contr ol System This system is used in applications where multiple receivers will listen to a single control channel, but duplex operation is desired.
Pelco Manual C505M-B (4/97) 5 3.2 CONNECTING THE RECEIVER Connecting the receiver involves mating the correct connector assembly to the appropriate receiver connector (J6 or J7) on the Coaxitron unit.
6 Pelco Manual C505M-B (4/97) Figure 4. Connector Assembly 3.2.1 Connector Assembly If you did not order a pre-assembled connector , assemble the connector parts ac- cording to the instructions below . Detail B, below , reflects the pin arrangement spe- cific to CX9500/CX9504 Receivers.
Pelco Manual C505M-B (4/97) 7 4.0 OPERA TION Upon applying power , the receiver will perform its self-test functions. These diag- nostics determine the receiver , pan and tilt, lens and camera configuration by exer- cising each. The results are reported by text superimposed on the video if the text generator is preset (ZS versions).
8 Pelco Manual C505M-B (4/97) 5.0 CX9500 RECEIVER BOARD DESCRIPTIONS The CX9500 Receiver contains three boards: the Mother Board, the Option Board, and the Power Supply Board. Gaining access to the board slot locations can be seen in Figure 5. As part of any operational set-up, the Option and Power Supply Boards must be pulled and configured.
Pelco Manual C505M-B (4/97) 9 5.2 OPTION BOARD This board contains all the circuitry required for all options. The components will be loaded or not loaded according to the model being built. Preset circuits are loaded for preset (PP). Receiver Address circuits are loaded for the 9504 versions of the receiver .
10 Pelco Manual C505M-B (4/97) Figure 6. Options Board Address Settings 2 2 22 2222 76 54 32 10 SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 ON RECEIVER ADDRESS Binary Weight Position Specific Decimal Equivalent 1.
Pelco Manual C505M-B (4/97) 11 Figure 8. V ariable Speed Power Supply Board Figure 7. Universal Power Supply Board JP2 JP4 JP6 JP8 JP10 JP12 JP14 JP16 JP18 JP1 JP3 JP5 JP7 JP9 JP11 JP13 JP15 JP17 Typi.
12 Pelco Manual C505M-B (4/97) W ARNING: The AC line voltage used to power the receiver/driver is the same voltage that is fed through the pan/tilt into the enclosure as “en- closure power”, which also supplies the heaters and blower where appli- cable.
Pelco Manual C505M-B (4/97) 13 6.0 FIRMW ARE DESCRIPTIONS 6.1 BAUD RA TES The hardware architecture between the controller and receiver is an RS-485 circuit designated the “control channel”. The baud rate is currently set to 2400 baud. The information is processed by the receiver every 16 ms.
14 Pelco Manual C505M-B (4/97) 7.0 SPECIFICA TIONS ELECTRICAL Input Voltage (50/60 Hz): Standard Version 24, 120, 230 VAC VS Version 120, 230 VAC Power Consumption (excluding PTZ): Standard Version 6 .
Pelco Manual C505M-B (4/97) 15 MECHANICAL Connectors: P/T 37-pin CPC Options 37-pin CPC Video 2 BNCs Power 3-wire #18 Awg Fuse 2 AG, 1/2 amp GENERAL Ambient Operating Temperature: -4 ° to 140 ° F (-20 ° to 60 ° C) Dimensions: See Figure 9. Figure 9.
16 Pelco Manual C505M-B (4/97) 8.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved.
An important point after buying a device Pelco CX9504 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco CX9504 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco CX9504 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco CX9504 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco CX9504 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco CX9504, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco CX9504.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco CX9504. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco CX9504 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
