Instruction/ maintenance manual of the product CCC4000 Pelco
Go to page of 12
CCC4000 Series CCD Color Camera Installation/ Operation Manual C1925M (3/99) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or.
2 Pelco Manual C1925M (3/99) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION ......................................................................................
Pelco Manual C1925M (3/99) 3 IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be obser v ed. 1. Installation and servicing should only be done by qualified service and installation personnel.
4 Pelco Manual C1925M (3/99) LOCA TION OF P AR TS AND CONTROLS Figure 1. Location of Parts and Controls (Front and Rear) BACK-FOCUS LOCKING RING CS-MOUNT RING 1/3-INCH CCD ELEMENT IRIS CONNECT OR POWE.
Pelco Manual C1925M (3/99) 5 INST ALLA TION CAMERA MOUNTING Mount the camera using a 1/4–20 mounting screw that does not exceed .197" (4.5 mm ± .2 mm) in length (refer to Figure 2). An optional CA1750 Mount Adapter is supplied to attach the camera to a ceiling mount.
6 Pelco Manual C1925M (3/99) POWER REQUIREMENTS An external power supply (not provided) is required when using CCC4000 Series cameras. This camera will accept either AC or DC power in accordance with the chart immediately below . A safety ground terminal ( ) is provided on the connector block to connect the camera to ground potential.
Pelco Manual C1925M (3/99) 7 LENS INST ALLA TION GENERAL LENS INFORMA TION CCC4000 Series cameras are factory adjusted to the CS-mount standard. Fixed iris, manual iris, or passive (DC controlled) auto-iris lenses may be used.
8 Pelco Manual C1925M (3/99) LENS MOUNTING Do not release the back-focus locking ring unnecessarily . Back-focus adjustment has been set at the factory to the standard CS-mount back-focus distance. T o mount a lens: 1. Remove the black protection cover from the CS-mounting ring.
Pelco Manual C1925M (3/99) 9 b. Adjust the lens and the CS-mount ring together until picture is sharpest. c. Hold the lens and CS-mount ring in place and turn the back-focus locking ring clockwise to tighten.
10 Pelco Manual C1925M (3/99) 2. Select a second camera that is out of synchronization with the first camera. 3. T o shift the V-phase, use a sharp pencil, a toothpick, or some other pointed device capable of being inserted into the V -phase adjustment opening.
Pelco Manual C1925M (3/99) 11 SPECIFICA TIONS CCD Sensor: Color 1/3-inch interline transfer Pixels NTSC: 512 H x 492 V PAL: 512 H x 582 V Sensing Area: 4.7 x 3.5 mm (3/16 x 1/8 in.) Sync System: Free running/line lock (when AC powered) Horizontal Resolution: 400 TV lines Lens Mount: CS mount Light Sensitivity: 3.
12 Pelco Manual C1925M (3/99) REVISION HISTOR Y Manual # Date Comments C1925M 1/98 Original version. 3/99 Added CCC4001-2 model. Revised manual format. P elco, the P elco logo, Camclosure, Esprit, Genex, Legacy , and Spectra are registered trademarks of P elco .
An important point after buying a device Pelco CCC4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco CCC4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco CCC4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco CCC4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco CCC4000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco CCC4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco CCC4000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco CCC4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco CCC4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
