Instruction/ maintenance manual of the product CCC1380UH-6X Pelco
Go to page of 6
C2935M-QS (2/06) CCC1380UH Series Camera Quick Start Guide This quick start guide describes how to install and configure the CCC1380UH Series camera in most applications. It contains a representation of the setup menus to help you locate and change specific settings.
C2935M-QS (2/06) 2 SETUP MENUS Use the setup menus to customize the camera settings. FUNCTION SETTINGS ECLIPSER LINE SYNC DC IRIS LEVEL PIXEL CORRECTION SYSTEM INFORMATION MAIN MENU EXIT AGC ESC BLC W.
3 C2935M-QS (2/06) ACCESSING THE SETUP MENUS Use the five-position button on the side panel to access and navigate the setup menus. The fol- lowing table lists the button presses for each menu action. LENS The CCC1380UH Series camera supports both manual and auto iris lenses, either fixed focal length or varifocal.
C2935M-QS (2/06) 4 MOUNT The CCC1380UH Series camera can be mounted from either the top or bottom, depending on the type of camera mount used in your installation. Use a standard 1/4-20 screw . The maximum thread depth is 0.25 inches (6.4 mm). POWER Connect 12 VDC or 24 V AC power to the back of the camera using the supplied terminal block.
5 C2935M-QS (2/06) LENS FOCUS After mounting the lens, you must focus your CCC1380UH Series camera. Y ou will adjust both the back focus (on the camera) and the fine focus (on the lens). NOTE: The back focus has already been adjusted using a standard CS- mount lens.
C2935M-QS (2/06) 6 6. V arifocal lens only: a. Set the varifocal to wide (W) and the lens focal length to far ( ∞ ). b. Adjust the back focus: (1) Use a 1.5-mm Allen wrench to loosen the back focus locking screw . (2) T urn the lens until the image is focused.
An important point after buying a device Pelco CCC1380UH-6X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco CCC1380UH-6X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco CCC1380UH-6X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco CCC1380UH-6X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco CCC1380UH-6X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco CCC1380UH-6X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco CCC1380UH-6X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco CCC1380UH-6X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco CCC1380UH-6X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
