Instruction/ maintenance manual of the product CCC1300H-2X Pelco
Go to page of 12
CCC1300H-2, CCC1300H-2X, and MCC1300H-2 1/3-Inch CCD Camera Installation/ Operation Manual C1961M-B (3/01) ® Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • Pelco Online @ www.
2 Pelco Manual C1961M-B (3/01) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................. 3 REGULA TOR Y NOTICES ..........................................................................
Pelco Manual C1961M-B (3/01) 3 IMPORT ANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service and installation personnel.
4 Pelco Manual C1961M-B (3/01) DESCRIPTION The CCC1300H-2, CCC1300H-2X, and MCC1300H-2 Digital Cameras are high resolution, compact video cameras that feature a 1/3-inch CCD imager . The camera ’ s high resolution and high-density image sensor ensure a sharp and clear picture over a wide range of conditions.
Pelco Manual C1961M-B (3/01) 5 Figure 1. Location and Function of Parts ESC - Electronic Sensitivity Contr ol This function changes the sensitivity of the camera by varying the electronic shutter speed according to the amount of incident light. The ESC range is 1:300.
6 Pelco Manual C1961M-B (3/01) POWER CONNECTIONS T o connect to the power supply: 1 . Strip at least .50 inch (13 mm) from the power cord to expose the wires. 2 . Insert the three wires into the holes in the terminal strip until they snap into place. 3 .
Pelco Manual C1961M-B (3/01) 7 GENERAL LENS INFORMA TION The CCC1300H-2, CCC1300H-2X, and MCC1300H-2 can use fixed, manual, or passive (DC-controlled) auto iris lenses. The camera has a standard CS lens mount, but can use a C-mount lens when a C/CS-mount adapter is installed between lens and camera.
8 Pelco Manual C1961M-B (3/01) 5. Adjust the back focus. a . Use an Allen wrench to loosen the back focus lock screw at the side of the camera. b . T urn the lens mount to obtain the sharpest image on the monitor. c . Turn the back focus locking ring clockwise to tighten.
Pelco Manual C1961M-B (3/01) 9 CAMERA SYNCHRONIZA TION The power supply of each camera is set to the same synchronized phase at the factory and usually does not need to be readjusted. When using more than one camera power supply , a brief vertical roll may occur on the monitor each time a camera view is switched.
10 Pelco Manual C1961M-B (3/01) ECLIPSER ADJUSTMENT The eclipser is set at the factory and usually does not need to be readjusted. However , if fine tuning is necessary , do the following: 1. Set the DIP switches. a. AGC: OFF b . ELC: OFF c . BLC: OFF 2.
Pelco Manual C1961M-B (3/01) 11 SPECIFICA TIONS GENERAL CCD Sensor: 1/3-inch interline transfer Picture Elements CCC1300H-2, MCC1300H-2: 768H x 494V (approx.
REVISION HISTOR Y Manual # Date Comments C1961M 11/99 Original version. C1961M-A 3/01 Add information on model CCC1300H-2X. C1961M-B 3/01 Revised eclipser adjustment instructions.
An important point after buying a device Pelco CCC1300H-2X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco CCC1300H-2X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco CCC1300H-2X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco CCC1300H-2X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco CCC1300H-2X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco CCC1300H-2X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco CCC1300H-2X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco CCC1300H-2X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco CCC1300H-2X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
