Instruction/ maintenance manual of the product C641M (11/03) Pelco
Go to page of 12
DX7100 Series Digital V ideo Recorder C641M (11/03) ® INST ALLA TION MANUAL.
2 C641M (11/03) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 3 WELCOME ...
C641M (11/03) 3 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
4 C641M (11/03) WELCOME Thank you for purchasing Pelco’ s DX7100 Series, high-quality digital video recorder (DVR). Y our new system combines the functions of a recorder and multiplexer into a product with versatile recording and playback functions.
C641M (11/03) 5 Figure 1. Rack Ear Installation IMPORT ANT : Slots and openings in the cabinet provide ventilation and prevent it from overheating. Do not block these openings.
6 C641M (11/03) BACK P ANEL LA YOUT Figure 2. Back Panel Layout (DX7116 Model Shown) 1 Camera Inputs – 8 or 16 BNC camera inputs, depending on model 2 Alarm Inputs – 8 normally closed dry contact .
C641M (11/03) 7 BASIC INST ALLA TION Basic installation covers all the equipment necessary to program and operate the system. Refer to the Extended Installation section for PTZ, alarm, sensors, and network connections.
8 C641M (11/03) Power Analog (spot) Monitor Network 1 1 2 2 3 3 4 4 5 5 NOTE: A standard European plug is attached to the power adapter . T o convert the adapter to the USA standard, loosen the Phillips head screw and remove the European plug.
C641M (11/03) 9 Figure 6. Bottom View of the RS-422 Converter 2 TCP/IP Access Consult your network administrator to avoid possible network conflicts. For TCP/IP access, connect the DX7100 to a 10/100 Ethernet network. Use a standard UTP Cat5 cable with RJ-45 connectors.
10 C641M (11/03) SPECIFICA TIONS ELECTRICAL/VIDEO Input V oltage: 100-240 V AC switchable, 50/60 Hz Power: 210 watts Signal System: NTSC/P AL CPU and RAM DX7008: Celeron ® , 256 MB DX7016: Pentium ®.
C641M (11/03) 11 REVISION HISTORY Manual # Date Comments C641M 11/03 Original version. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, Legacy, and Coaxitron are registered trademarks of Pelco. ® Windows is a registered trademark of Microsoft Corporation.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C641M (11/03) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C641M (11/03) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C641M (11/03) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C641M (11/03) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C641M (11/03) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C641M (11/03), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C641M (11/03).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C641M (11/03). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C641M (11/03) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
