Instruction/ maintenance manual of the product C580M Pelco
Go to page of 20
PT506-24DT Pan/Tilt Lens Control PT506-24A Auto/Random Scan Control Installation/ Operation Manual C580M Rev D (9/97) ® Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.
18 Pelco Manual C580M Rev D (9/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 1 2.0 DESCRIPTION .
Pelco Manual C580M Rev D (9/97) 19 LIST OF ILLUSTRA TIONS Figur e Page 1 PT506-24DT Basic System Configuration ......................................... 3 2 PT506-24DT Configured with PT506-24A ......................................... 4 3 PT506-24DT Configured with a Relay Box .
20 Pelco Manual C580M Rev D (9/97) (This page intentionally left blank.) iv.
Pelco Manual C580M Rev D (9/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
2 Pelco Manual C580M Rev D (9/97) 2.0 DESCRIPTION The PT506-24DT is a pan/tilt and lens control designed to remotely operate 24 V AC pan/tilts and all Pelco motorized zoom lenses. This unit can control up to six (6) different locations, all of which can be selected by pressing the corresponding illu- minated push-button switch.
Pelco Manual C580M Rev D (9/97) 3 3.0 INST ALLA TION Figure 1 shows a typical rear panel installation of the PT506-24DT controller . The distance from the controller is limited by the wire size and pan/tilt used. (See Sec- tion 3.1 Recommended Cable Distances.
4 Pelco Manual C580M Rev D (9/97) Figure 2. PT506-24DT Configured with PT506-24A Figure 3. PT506-24DT Configured with a Relay Box.
Pelco Manual C580M Rev D (9/97) 5 3.2 CONNECTOR ASSEMBL Y Assemble the connector parts according to the instructions below . Detail B, below , reflects the pin arrangement specific to all PT506-24DT Pan/T ilt and Lens Control and the PT506-24A Auto/Random Scan Control.
6 Pelco Manual C580M Rev D (9/97) 4.0 OPERA TION The PT506-24DT will not allow control of any of the six pan/tilt stations until one is selected by pressing the desired station on the latching selection switches. Once a selection has been made, the switch will illuminate and all control functions will be available only to that particular station.
Pelco Manual C580M Rev D (9/97) 7 4.2 OPERA TIONAL TEST — PT506-24A The PT506-24A will add two modes of automatic pan operation to the PT506-24DT . Once the PT506-24A is interconnected as shown in Figure 2, apply power to the units.
8 Pelco Manual C580M Rev D (9/97) 5.0 MAINTENANCE Under normal operating conditions and usage, maintenance of this equipment is not necessary . However , if maintenance is required, repairs should be performed by a qualified service technician or equipment should be returned to the factory for repair .
Pelco Manual C580M Rev D (9/97) 9 6.0 SCHEMA TICS If necessary , refer to the following schematics for troubleshooting or repair Figure 5. PT506-24DT Schematics (Sheet 1 of 5).
10 Pelco Manual C580M Rev D (9/97) Figure 5. PT506-24DT Schematics (Sheet 2 of 5).
Pelco Manual C580M Rev D (9/97) 11 Figure 5. PT506-24DT Schematics (Sheet 3 of 5).
12 Pelco Manual C580M Rev D (9/97) Figure 5. PT506-24DT Schematics (Sheet 4 of 5).
Pelco Manual C580M Rev D (9/97) 13 Figure 5. PT506-24DT Schematics (Sheet 5 of 5).
14 Pelco Manual C580M Rev D (9/97) 7.0 SPECIFICA TIONS ELECTRICAL PT506-24DT Input Voltage: 120 VAC, 50/60 Hz (230 VAC optional) Output Voltage: 24 VAC, 60 Hz pan/tilt supply 0 to ± 9 VDC lens supply Power Requirement: 1.
Pelco Manual C580M Rev D (9/97) 15 GENERAL Enclosure Construction Panel: Aluminum Cover: Steel, textured black enamel Chassis: Steel, galvanized Temperature Range: 32 ° to 120 ° F (0 ° to 50 ° C) Size: See Figure 6 Weight PT506-24DT 13 lbs 6 oz (6 kg) PT506-24A 18 lbs (8.
16 Pelco Manual C580M Rev D (9/97) 8.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved.
An important point after buying a device Pelco C580M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C580M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C580M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C580M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C580M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C580M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C580M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C580M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C580M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
