Instruction/ maintenance manual of the product C493M-G Pelco
Go to page of 16
HS1500 High-Security Enclosure INSTALLATION C493M-G (11/97).
.
C493M-G (11/97) 3 Contents Important Safeguards and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description . . .
4 C493M-G (11/97) Important Safeguards and W arnings Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
C493M-G (11/97) 5 Description The HS1500 is a high security camera enclosure of medium size designed for indoor “corner mount” installation for such applications as elevators, parking garages, classrooms, detention cells, etc., requiring maximum protection from vandalism in an unobtrusive package.
6 C493M-G (11/97) Installation NOTE: The four (4) fasteners required to secure the HS1500 to a wall (minimum 3/8” diameter recommended) are not supplied. Before installing the HS1500 to a wall, make certain that the mounting surface is able to support the full weight of the enclosure plus the camera and lens.
C493M-G (11/97) 7 (.
8 C493M-G (11/97) (This page intentionally left blank).
C493M-G (11/97) 9 HB1500/HB1524 HEATER/BLOWER KIT The HB1500/HB1524 heater/blower kits require either 120 V AC or 24 V AC, respectively . The heater provides 80 watts of heat and is thermostatically controlled to turn on at 40°F (4.44°C) and turn off at 60°F (15.
10 C493M-G (11/97) HEATER/BLOWER KIT INSTALLATION T o install the HB1500/HB1524 heater/blower kit, perform the following steps: 1. Remove the cover (Figure 5, item 4). 2. Attach the heater pads to each side of the mounting frame, below the tilt table assembly .
C493M-G (11/97) 11 T AMPER SWITCH INSTALLATION The HS1500 enclosure comes standard from the factory with a tamper switch installed. Should it become necessary to install a replacement switch, refer to Figure 4 for the correct position of the bracket/switch and perform the following steps: 1.
12 C493M-G (11/97) Exploded Assembly Diagram Figure 5. HS1500 Enclosure Exploded Assembly Diagram T able A. HS1500 Enclosure Exploded Assembly Parts Lists Item No. Qty Description Part Number 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 Bracket, switch, break-in Window , 10" x 9" x .
C493M-G (11/97) 13 Specifications MECHANICAL Window 1/2" (12.7 mm) thick impact and abrasion resistant clear Lexan Camera Mounting Adjustable tilt table Maximum Camera/Lens Size Accepts camera/lens combinations (including BNC connector) up to: 8.
14 C493M-G (11/97).
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C493M-G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C493M-G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C493M-G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C493M-G you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C493M-G will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C493M-G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C493M-G.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C493M-G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C493M-G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
