Instruction/ maintenance manual of the product C3660M Pelco
Go to page of 10
For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 1 Creating Custom Wiegand Card Format s Pel c o, Inc. Worldwide Headquarters: 3500 Pel c o W ay, Cl ovis, Calif o rnia 93612-5699 USA USA & Canada T el: (800) 289-9100 • F AX (800) 289-9150 International T el: (559) 292-1981 • F AX (559) 348-1120 www.
Creating Custom Wiegand Card Formats 2 For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users Creating Custom Wiegand Card Format s Content s This document provides instructions on using the W iegand Format Editor found within the Global Configuration secti on of the Intelli-M ® Supervisor Plus software.
Creating Custom Wiegand Card Formats For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 3 Overview Of Wiegand Fo rmat s Used By Intelli-M ® The Intelli-M ® Supervisor Plus software provides the ability to create custom W iegand card formats.
Creating Custom Wiegand Card Formats 4 For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users.
Creating Custom Wiegand Card Formats For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 5.
Creating Custom Wiegand Card Formats 6 For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users S tandard 35-bit Corporate 1K (for eIDC Only) The standard 35-bit Corporate 1k card format (show n above) that is listed as a default format within Supervisor Plus can be cu stomized to work with an IDC c ontroller .
Creating Custom Wiegand Card Formats For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 7 Creating A Custom Wiegand Format Perform the following steps to custom crea te an access card with W iegand formatting: 1. Select “Global Configuration” from the In telli-M Supervisor Plus “System Management” screen.
Creating Custom Wiegand Card Formats 8 For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 3. Select a format to be customized that is closest to the fo rmat you desire, and then click on the “Modify ...” button. Note: Infinity 37 is a proprietary format that cannot be shown , edited, or deleted at this time.
Creating Custom Wiegand Card Formats For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 9 -- The “Card Code” is represented as light bl ue boxes. “S tart Bit” within the “Card Code” area must be assigned. The total num ber of bits allotted to “Size” for “Card Code” must also be assigned.
Creating Custom Wiegand Card Formats 10 For Intelli-M Supervisor Plus A nd Intelli-M Web Interface Users 5. Set up the “W iegand Format Detail” screen to fit your need. When finished Click “OK” to save the format. 6. Click “Done” to leave the W iegand Formats menu.
An important point after buying a device Pelco C3660M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C3660M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C3660M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C3660M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C3660M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C3660M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C3660M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C3660M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C3660M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
