Instruction/ maintenance manual of the product C3433M (3/07) Pelco
Go to page of 24
IP110 Series Camclosure ® W eb Browser C3433M (3/07) OPERA TION.
2 C3433M (3/07) Contents Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C3433M (3/07) 3 VIDEO QUALITY—CAUTION REGARDING USER SELECTED OPTIONS Pelco systems are capable of providing high quality video for both live viewing and playback. However , the systems can be used in lower quality modes, which can degrade picture quality , to allow for a slower rate of data transfer and to reduce the amount of video data stored.
4 C3433M (3/07) W elcome This manual explains how to interface with the IP110 Camclosure ® using a standard Web browser (example Microsoft ® Internet Explorer). The IP110 can also be used with an Endura ® system as an Endura Enabled ™ device or a third party system with Pelco’ s API interface.
C3433M (3/07) 5 Using a W eb Browser The following are the minimum system requirements to use a Web browser with the IP110: • PC (Pentium ® 4 microprocessor , 1.6 GHz) with Windows 98/2000/XP (or higher) or Mac OS X 10.3.9 (or higher) • RAM: 512 Mbyte • Ethernet Card: 100 Mbit • Microsoft ® Internet Explorer 5.
6 C3433M (3/07) IP110 Main Menu HOME SCREEN The following features are available from the Home Screen: • Live Stream View: Live video is displayed in the center of the screen. • Image Rate Setting: The image rate can be set to 15, 10, 5, 2, or 1 ips; 15 is the default setting.
C3433M (3/07) 7 IMAGE RATE SETTING The image rate for the IP110 can be set to 15, 10, 5, 2, or 1 ips. 15 ips is the default setting. T o change the image rate do the following: 1. Open the Image Rate drop-down box by clicking the down arrow . 2. Select a image rate from the drop-down box.
8 C3433M (3/07) SETTINGS SCREEN Use the Settings screen to set the name and language of the IP110; configure network settings; and add, change, or delete users and roles (permissions). GENERAL T AB Use the general tab to change the device name to a user -friendly name.
C3433M (3/07) 9 NETWORK T AB Use the Network tab to change network settings including the host name, turn DHCP (Dynamic Host Configuration Protocol) setting on/off, or set a static IP address. Figure 4. Network T ab How to Change the Network Settings 1.
10 C3433M (3/07) USERS T AB The User tab allows the administrator to create, modify , or delete user accounts (which can contain one or more roles). The User tab includes default accounts for the following: • Administrator: This is the only defined user that cannot be deleted.
C3433M (3/07) 11 How to Add a New User 1. Click Settings in the main menu, the IP110 settings menu opens. 2. Click the Users tab. The Create a New User form opens. 3. Fill in the form fields. (User name, Password and Role are required fields.) Do not use spaces when entering the user name in the User Name field.
12 C3433M (3/07) ROLES T AB Use the Roles tab to create, change, or delete roles (permissions). Multiple permissions can be assigned to a role. The following are the available permissions that can be assigned to a role: • Edit Users Profile: Gives a user permission to edit his/her user profile.
C3433M (3/07) 13 How to Modify an Existing Role 1. Click Settings in the main menu, the IP110 settings menu opens. 2. Click the Roles tab. All defined roles are located in the box on the left side of the screen. 3. Click on a defined Role. The Create a New Role form changes to the Editing Role form.
14 C3433M (3/07) EDIT PROFILE SCREEN The Edit Profile screen gives a user permission to modify his/her account. They can change/edit the information in the following fields: • First Name • Last Name • Password Figure 9. Edit Profile Screen HELP SCREEN For help with the system select the Online help menu.
C3433M (3/07) 15 How to Use the Device Utility Use the Device Utility software to identify the IP address, check the status of the device, and update firmware. Figure 10. Pelco Device Utility Software INSTALLING THE IP110 DEVICE UTILITY T o install the IP110 Device Utility software, complete the following steps: 1.
16 C3433M (3/07) UPDATING FIRMWARE IMPORT ANT : Perform system upgrades only when necessary . Firmware upgrades do not need to be performed if the system is operating properly . Updated firmware and language files can be uploaded to the IP110 Camclosure.
C3433M (3/07) 17 4. Select the file to upload and then click the open button. Figure 12. Select File 5. The Perform Update dialog box opens, do one of the following: • Click OK to accept. • Click Cancel to close the dialog box. Figure 13. Perform Update 6.
18 C3433M (3/07) DEVICE UTILITY: ACCESSING THE CAMERA T o access the IP110 using the Device Utility , do the following: 1. Open the Pelco Device Utility . 2. Select the device to view , and then double click on the listed device. The Login screen opens.
C3433M (3/07) 19 T roubleshooting Problem Possible Cause Suggested Remedy No video PoE power issue • Check CA T 5 cable connection. • Check PoE injector power .
20 C3433M (3/07) Image quality Image not focused Adjust the field of view and the focus. 15 ips quality bad In some networks with high latency , the maximum frame rate may not be attainable. 30 ips not available The IP110 only supports MJPEG at rate up to 15 ips for NTSC camera modules where applicable.
C3433M (3/07) 21 Specifications GENERAL Pan/T ilt Adjustment Manual Pan 360° T ilt 80° (20° to 100° range) Rotation 360° Construction Aluminum with steel camera mounting bracket and polycarbonate dome Cable Entry One 0.75-inch (1.91 cm) NPT threaded opening on side; two 0.
22 C3433M (3/07) ENVIRONMENT AL Environment Low temperature, indoor/outdoor Operating T emperature -50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C) Thermostat Operation Heater is thermostatically controlled to activate <41°F (<5°C) CAMERA Service Connector 3-conductor , 2.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Australia | Canada | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab Emirates | United Kingdom | United States Worldwide H.
An important point after buying a device Pelco C3433M (3/07) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C3433M (3/07) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C3433M (3/07) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C3433M (3/07) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C3433M (3/07) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C3433M (3/07), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C3433M (3/07).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C3433M (3/07). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C3433M (3/07) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
