Instruction/ maintenance manual of the product C3432M-F Pelco
Go to page of 40
INST ALLA TION C3432M-F (6/08) Integrated Camera System IP110 Series Camclosure ®.
2 C3432M-F (6/08) Contents Important Safety Instructi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . .
C3432M-F (6/08) 3 List of Illustrations 1 DHCP Network Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Endura Network Example . . . . . . . . . . . . . . . . . . . . .
4 C3432M-F (6/08) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
C3432M-F (6/08) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. O peration is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 C3432M-F (6/08) Open Source Software Notice This product includes certain open source or other softwar e originated from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Publ ic License (LGPL), and different and/or additional copyright lic enses, disclaimers, and notices.
C3432M-F (6/08) 7 Description The IP110 Series Camclosure ® is an ind oor/outdoor , fixed mini do me system with a built-in 100Base-TX network interface for live streaming to a standard Web browser (Microsoft ® Internet Explorer ® or Firefox ® ).
8 C3432M-F (6/08) Basic System Configurations IMPORT ANT NOTE. PLEASE READ . The network implementation s in this document are shown as general representations only and are not intended to show detailed network topologies.
C3432M-F (6/08) 9 Figure 3. Private Network Example Figure 4. S tatic Network Example IP110 IP110 WEB BROWSER NETWORK SWIT C H IF NOT DH C P, C AMERA IS ASSIGNED DEF AUL T IP ADDRESS 192.
10 C3432M-F (6/08) Cover and Back Box Installation The IP110 Series Camclosure integrated camera system mounts only to a surface. It can be wired through the cover into a surface, electrical box, plaster ring, or through a side conduit opening. BASIC SURFACE INSTALLATION 1.
C3432M-F (6/08) 11 4S ELECTRICAL BOX INSTALLATION 1. Attach an ICS110-AP adapter plate (not supplied) to a 4S electrical box. Use two 8-32 x 0.75-inch Phillips flat head screws (supplied with both the IP110 and the ad apter plate). 2. Remove the two 8-32 x 0.
12 C3432M-F (6/08) 404 PLASTER RING INSTALLATION 1. Remove the two 8-32 x 0.3 75-inch Phillips pan head screws and washers to separate the cover from the back box. 2. Pull cable/wires into the cover . Use three suppli ed 6-32 x 0.75-inch Phillips pan head screws o r two supplied 8-32 x 0.
C3432M-F (6/08) 13 SIDE CONDUIT INSTALLATION 1. Remove the two 8-32 x 0.3 75-inch Phillips pan head screws and washers to separate the cover from the back box. 2. Remove the cond uit plug from the cover . Inst all a 0.75-inch (1.91 cm) threaded conduit connector (not supplied) into the conduit hole in the cover .
14 C3432M-F (6/08) Wiring T ables CAT5 CABLE Connect a Cat5 cable to the RJ-45 network connector . The 8-pin connector includes video and PoE for the camera.
C3432M-F (6/08) 15 ALARM AND 24 V A C WIRES CONNECTING A RELAY DEVICE The IP110 Camclosure has an output for triggering an external device. It supports both momentary and continuous relay operation. Y ou can operate the relay interactively, during an acti ve connection, or automatically to coincide with certain events.
16 C3432M-F (6/08) CONNECTING ALARMS The IP110 Camclosure provides an alarm input for exte rnal signaling devices, such as door cont acts or motion detectors.
C3432M-F (6/08) 17 Unsupervised Alarms When an alarm is configured as an unsupervised alarm, the Camclosure only triggers an alarm when the normal alarm state (open or closed) changes. Figure 12 illustrates the alarm a nd no alarm conditi ons of an unsupervised alarm input.
18 C3432M-F (6/08) Alarm Connection s Figure 14 shows how to wire the IP110 Camclosure to an alarm (refer to Wiring T ables on pag e 14). Figure 14. Unsupervise d Alarm In put Wiring NOTE: The black wire is internally connected to the Camc losure chassis.
C3432M-F (6/08) 19 Camera Module The IP110 Series Camclosure camera module includes the camera, camera bracket, and heater board. T o perform most camera adjustments, you must remove the module from the back box. Use the following instructions to install/remove the camera module.
20 C3432M-F (6/08) MODULE INSTALLATION T o install the camera module into the back box: 1. Plug the camera (10-pin), heater bo ard (4-pin), and service (3-pin) connectors into the ba ck box (refer to Figure 16).
C3432M-F (6/08) 21 Camera Adjustments T o perform camera adjustments, complete the following steps: 1. Make sure the camera and service connectors are connected to the board inside the back box. Y ou may have to remove the camera module from th e back box.
22 C3432M-F (6/08) V ARIFOCAL LENS ZOOM AND FOCUS ADJUSTMENTS T o adjust the field of view and the focus: 1. Select a field of view by turning the zoom ad justment ring clockwise/counterclockwise (refer to Figure 18). 2. T ighten the zoom locking screw .
C3432M-F (6/08) 23 DN/CH SERIES ADJUSTMENTS Refer to Figure 19 to adjust the IP110-DN o r IP110-CH model. Figure 19. Adjusting the IP110-DN/CH S eries Camclosure SWITCH SETTINGS Locate the DIP switch.
24 C3432M-F (6/08) SW4-4: Flickerless In certain lighting conditions, a flicker in the light source may affect camera operation. Flic kering can be caused by a number of conditions, including the qua lity of the source power and the age and type of fluorescent bulbs and ballasts.
C3432M-F (6/08) 25 DAY/NIGHT OPERATION NOTE: This section only applies to DN model cameras. DN model cameras regularly check the brightness level of the field of view t o determine when to switch between day (color) and nig ht (black-white) operation.
26 C3432M-F (6/08) DW/CW SERIES (WIDE DYNAMIC RANGE) ADJUSTMENTS Refer to Figure 21 to adjust the IP110-DW or IP110-CW model. Figure 21. Adjusting the IP110-DW/CW S eries Camcl osure SWITCH SETTINGS Locate the DIP switch. Then set the switches for your installation.
C3432M-F (6/08) 27 SW1-4: Auto White Balanc e/Manual White Balance Auto white balance (AWB) is enabled by default (ON). T o manually set and lock the white balance: 1. Set SW1-4 to ON. 2. Hold a white background in front of the lens until the video shows all white .
28 C3432M-F (6/08) Figure 20 and T able D show how the camera switches between color and black-white operation for each setting. Figure 22. DW Model s Threshol d S witching Levels NOTE: These switching thresholds are approximate and we re measured u sing a 3.
C3432M-F (6/08) 29 Camera Positioning Manually rotate and tilt the camera module to position the camera. Then tighten the tilt screws (axis 1 in Figure 23). NOTE: Do not over -rotate the module. Excessively turni ng the module in one direction could result in damage to the wiring.
30 C3432M-F (6/08) Install Dome and T rim Ring 1. T o adjust the dome liner refer to Figure 24 and complete the following steps: a. Align the screw holes in the trim ring with those in the back box to identify the proper dome liner position. b. Loosen the three Phillips screws located in t he trim ring.
C3432M-F (6/08) 31 Service Connector The IP110 Series Camclosure integrated camera system includes a service connector th at outputs camera video. Use it at the installation site to set up the field of view and focus the camera.
32 C3432M-F (6/08) d. Solder the center connector of the cable to t he center pin of the plug. e. Thread the braid of the cable through the hole in the crimp pin. f. Solder the braid to the top of the crimp pin. g. Crimp the end of the crimp pin around the cable.
C3432M-F (6/08) 33 Reset Button Use the reset button locate d on the board inside the back box to access the following modes: T o access one of these modes: 1. Press and hold the reset butto n. The unit starts cycling throug h the modes; hold the b utton for four seconds to access (cycle thro ugh) each mode.
34 C3432M-F (6/08) T roubleshooting Problem Possible Cause Suggested Remedy No video PoE power issue • Check Cat5 cable connection. • V erify PoE is enabled. • Disconnect the Cat5 cable from the PoE and then reconnect the cable. Check the LED inside the back box to see if it is fl ashing green, indicating the camera has power .
C3432M-F (6/08) 35 Image too light Installation error • Check DIP switch settings. • Use a service connector to check camer a operation. Connect one end of the service connector to the service connector input inside the back box. Then connect the other end of the service connector to a monitor .
36 C3432M-F (6/08) Network not working Faulty cable connection Check all cabl e connections and e nsure all plugs are properly plugged in. Incorrect serial device configuration A hub will not work with the available network bandwidth shared across all ports.
C3432M-F (6/08) 37 Specifications GENERAL Pan/T ilt Adjustment Manual Pan 360° T ilt 80° (20° to 100° range) Rotation 360° Construction Aluminum with steel camera mounting bracket and polycarbonate dome Cable Entry One 0.75-inch (1.91 cm) N PT threaded opening on side; two 0.
38 C3432M-F (6/08) ENVIRONMENT AL Environment Low temperature, indoor/ou tdoor Operating T emperature -50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C) Thermostat Operation Heater is the rmostatically controlled to activate < 41°F (< 5°C) CAMERA Service Connector 3-conductor , 2.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any mer c handise proved defective in ma terial or wor kmanship for a period of one year afte r the date of shipment.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 U S A U S A & Canada T el: (800) 289-9100 Fax: (800) 289-9150 International T el: +1 (559) 292-1981 Fax: +1 (559) 348-1120 www .
An important point after buying a device Pelco C3432M-F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C3432M-F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C3432M-F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C3432M-F you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C3432M-F will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C3432M-F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C3432M-F.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C3432M-F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C3432M-F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
