Instruction/ maintenance manual of the product C2910M-A (4/05) 3 Pelco
Go to page of 44
® INSTALLATION/OPERATION CCC5100H Series SIMD Digital Color Camera C2910M-A (4/05).
.
C2910M-A (4/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cautions .
4 C2910M-A (4/05) Auto White Balance (AWB) Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Predefined Profile Settings .
C2910M-A (4/05) 5 List of Illustrations 1 CCC5100H Series Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 DC-Drive Auto Iris Lens Connections (Camera Connector) .
6 C2910M-A (4/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C2910M-A (4/05) 7 Description The CCC5100H Series camera is a high resolution, 480 TV line, wide dynamic range video camera with a 1/3-inch SIMD imager . It a utomatically senses and sets the video standard to NTSC or P AL. It supports DC-drive auto iris lenses as well as C- and CS-mount lenses.
8 C2910M-A (4/05) PARTS LIST CCC5100H Series camera Quick Start Guide T wo-pin terminal block (CCC5100H-6/CCC5110H-6 only) Four -pin auto iris connector Lens mount cap Resource CD: • Installation/Operation manual: INST ALL.PDF • Quick Start Guide: QSG.
C2910M-A (4/05) 9 Lens Mounting The CCC5100H Series camera supports both manual and DC-drive auto iris lenses, either fixed focal length or varifocal. The camera accepts both CS- and C-mount lenses without a mount adapter . WIRING AN AUTO IRIS LENS DC-drive auto iris lenses are controlled through the four -pin drive connector (type D4-152N).
10 C2910M-A (4/05) Camera Mounting The CCC5100H Series camera can be mounted from either the top or bottom, depending on the type of camera mount used in your installation. Use a standard 1/4-20 screw (provided) with a maximum thread length of 0.375 inch (10 mm).
C2910M-A (4/05) 11 Power , V ideo, and Control Connections The CCC5100H Series camera is available in low voltage (CCC5100H-6/CCC5110H-6) and high voltage (CCC5100H-7/CCC5110H-7) models. The required voltage is clearly marked on the rear panel of the camera.
12 C2910M-A (4/05) USING HIGH V OLTAGE POWER The CCC5100H-7 and CCC5110H-7 cameras are designed to operate from a 120/240 V AC power source. Connect the nondetachable power cord to a power source of 100-240 V AC ±10%, 47-63 Hz. The operating voltage is clearly marked on the rear panel of the camera.
C2910M-A (4/05) 13 USING THE MULTIFUNCTION CONNECTOR The CCC5100H Series camera combines data, video, and power leads into a single multifunction connector on the rear panel. This lets you quickly install and uninstall the camera. The camera supports two different RJ-45 plugs, depending on the application.
14 C2910M-A (4/05) CONTROL LEADS The CCC5100H Series camera lets you access and configure the menu settings from any Pelco keyboard, receiver , or other device that supports the Pelco D or Pelco P protocol.
C2910M-A (4/05) 15 POWER LEADS Connect the low voltage power wires to the multifunction connector (refer to T able H). T able H. Low V oltage Power Connections USING THE SERVICE CONNECTOR The CCC5100H Series camera rear panel includes a service connector that outputs camera video and gives access to the setup menus.
16 C2910M-A (4/05) Setup Menus The CCC5100H Series camera uses setup menus instead of hardware switches for configuring the camera. As a result, you have more options for customizing the camera for its specific application.
C2910M-A (4/05) 17 LOW LIMIT 2k 5.5k HIGH LIMIT 5.5k 11k BACK EXIT RED GAIN BLUE GAIN -20 20 BACK EXIT ACTIVE HI-DEF SAVE AS CUSTOM1 DEFAULT HI-DEF BACK EXIT FIRMWARE VER.
18 C2910M-A (4/05) ACCESSING THE SETUP MENUS (REAR PANEL) Y ou can access and navigate the setup menus from the top, center , and bottom buttons on the rear panel (refer to Figure 6). Figure 6. Rear Panel Buttons These buttons respond differently to short and long presses.
C2910M-A (4/05) 19 To move to a previous menu, select BACK and press the center button. To close the setup menus, select EXIT from any menu and press the center button. ACCESSING THE SETUP MENUS (PELCO CONTROLLER) USING PRESET 95 Y ou can use preset 95 to access and navigate the setup menus from various Pelco controllers.
20 C2910M-A (4/05) MPT9500: Extended Coaxitron or RS-485 Mode 1. Enter 95 and press the PRESET SET key . 2. Press the F2 key . The MAIN MENU appears. PelcoNet ™ 1.
C2910M-A (4/05) 21 MAIN MENU The following sections describe each menu and all settings associated with that menu. The sample screens in each section show the defa ult setting. To display the MAIN MENU: • Press the center button on the rear panel or the CST150/CST100 tool.
22 C2910M-A (4/05) The default is AUTO. Use a short center press to save the video standard. The display blinks and the cursor exits to the menu. Automatic (AGC) When configuring a DC-drive auto iris lens or when focusing the camera, you may have to temporarily enable or disable automatic gain control (AGC).
C2910M-A (4/05) 23 AUTO IRIS Use this menu to configure a DC-drive auto iris lens. For information on adjusting DC offset, refer to DC-Drive Auto Iris Lens Setup . DC Offset Use this slider to adjust the camera’ s DC voltage setting to match the drive circuit on the auto iris lens.
24 C2910M-A (4/05) CAMERA DISPLAY MENU Use the CAMERA DISPLAY menu to set camera identification information and to configure gamma, saturation, automatic gain control (AGC), and sharpness. Camera Name Enter the display name for this camera, one character at a time, up to 12 characters.
C2910M-A (4/05) 25 Manual Gamma Use this slider to either increase or decrease the amount of gamma correction. Move the slider from 25 to 100. The default depends on the selected profile (refer to T able K). Saturation Use this slider to either increase or decrease the amount of color in an image.
26 C2910M-A (4/05) LIGHT METER MENU The CCC5100H Series camera uses light meter zones to adjust how it implements backlight compensation. Many installations include multiple light levels that make backlight compensation difficult. Use meter zones to correct this problem.
C2910M-A (4/05) 27 Active Zone Select the zone to enable: ZONE 1, ZONE 2, ZONE 3, or ZONE 4. The default zone is ZONE 2. Y ou can activate only one zone at a time. Edit Zone Select the zone to define: EDIT ZONE 1, EDIT ZONE 2, EDIT ZONE 3, or EDIT ZONE 4.
28 C2910M-A (4/05) A TW NORMAL /A TW DESATURATION Select this option to display the A TW NORMAL/DESA T menu. Use it to set the high and low temperature limits for the desired Auto T racing White Balance (A TW) mode. A TW Normal: Use the LOW LIMIT and HIGH LIMIT sliders to either increase or decrease the light temperature limits.
C2910M-A (4/05) 29 PROFILES MENU Use the PROFILES menu to select or save a profile. Use profiles for faster installation or to quickly adjust camera settings for changing light conditions.
30 C2910M-A (4/05) Figure 9. Default Profile Scenes HI-DEF (High Definition) : Select this profile for color - ful scenes that require accurate color reproduction. This profile emphasizes color reproduction over light levels. WDR (Wide Dynamic Range) : Select this profile for scenes that have both very bright and very dark areas.
C2910M-A (4/05) 31 SYSTEM INFORMATION MENU Use the SYSTEM INFORMA TION menu to display the camera firmware information. Restart Camera Select this option to turn off the camera and then restart it. Restore Factory Settings Select this option to reset the camera to the factory default settings.
32 C2910M-A (4/05) V ideo Format Autosense The CCC5100H Series camera offers both manual and automatic options for selecting the correct video format. Y ou can manually select the video format through the setup menus. Or you can let the camera determine (autosense) the correct video format.
C2910M-A (4/05) 33 Lens Setup and Focus Procedures The following sections describe how to set up and focus the lens for your CCC5100H Series camera. DC-DRIVE AUTO IRIS LENS SETUP Before using a DC-drive auto iris lens, you should adjust the DC offset setting.
34 C2910M-A (4/05) 7. Hold the auto iris lens so you can watch the iris (refer to Figure 12). Then increase the DC OFFSET setting slowly until the iris closes. Figure 12. Open Iris and Closed Iris 8. As soon as the iris closes, slowly decrease the DC OFFSET value by 14, or until the iris opens again.
C2910M-A (4/05) 35 CAMERA FOCUSING The CCC5100H Series camera features a fine focus screen that helps you focus your camera. Use it to adjust both the back focus (on the camera) and the fine focus (on the lens). Use the procedure specific for your lens.
36 C2910M-A (4/05) 9. Manual iris only: Adjust the iris for the best picture quality . The largest aperture gives the best light sensitivity; the smallest aperture gives the greatest depth of field. 10. T ighten all lens locking screws. 11. Auto iris only: Remove the ND filter .
C2910M-A (4/05) 37 3. If necessary , enable Automatic Gain Control (AGC) on the LENS/VIDEO SIGNAL menu. AGC is enabled by default. a. Display the AUTO IRIS menu. b. Switch the AUTOMA TIC (AGC) setting to ON. 4. Display the FINE FOCUS menu. 5. Aim the camera at the farthest object in the field of view .
38 C2910M-A (4/05) Camera Synchronization Camera synchronization may affect installations that use two or more AC power supplies for multiple cameras. Due to different power phases, a brief vertical roll may appear on the monitor when switching between cameras.
C2910M-A (4/05) 39 Auto White Balance (A WB) Calibration In some installations, use the auto white balance (AWB) feature of the CCC5100H Series camera to render the most accurate image color possi- ble. Mixed color applications may affect the amount of color adjustment.
40 C2910M-A (4/05) Predefined Profile Settings T able K lists the default settings that differ for each predefined profile. When configuring the CCC5100H Series camera, start with the profile that best fits your installation. After you customize it, save it into one of the user -definable profiles: CUSTOM1 or CUSTOM2.
C2910M-A (4/05) 41 Specifications GENERAL Imaging Device 1/3-inch SIMD Dynamic Range 95 dB typical/120 dB maximum Picture Elements Sensor resolution: 742 (H) x 552 (V) Scanning System 525 (NTSC)/625 .
42 C2910M-A (4/05) PHYSICAL Dimensions 3.60” D x 2.77” W x 2.40” H (9.14 x 7.03 x 6.09 cm) Weight (without lens) 0.40 lb (0.20 kg) Shipping Weight 1 lb (0.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C2910M-A (4/05) 3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2910M-A (4/05) 3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2910M-A (4/05) 3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2910M-A (4/05) 3 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2910M-A (4/05) 3 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2910M-A (4/05) 3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2910M-A (4/05) 3.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2910M-A (4/05) 3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2910M-A (4/05) 3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
