Instruction/ maintenance manual of the product C2477M (6/03) Pelco
Go to page of 12
INST ALLA TION ® ICS090 Series Camclosure ® Housing (Not Upgradeable) C2477M (6/03).
CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 WELCOME ..................................................................................................
IMPORT ANT SAFEGUARDS AND WARNINGS 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA T ype 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and must not be installed where exposed to rain and moisture.
WELCOME Thank you for purchasing Pelco’ s ICS090 Series Camclosure ® housing for indoor applications. The unit is easy to install and can be mounted to the surface of a ceiling/wall or recessed in a ceiling/ wall. The following is supplied with the ICS090 Series housing: Qty .
REMOVE THE BUBBLE Tu rn the bubble counterclockwise and lift (refer to Figure 1). Place the bubble on a nonabrasive surface. Figure 1. How to Remove the Bubble C2477M (6/03) 5.
INST ALL THE BACK BOX The installation methods for the ICS090 Series housing include the following: • Mount to the surface of a ceiling/wall • Install in a suspended ceiling • Install in a fixed ceiling/wall Select the best method for your installation and refer to the following pages for instructions.
IN-CEILING INST ALLA TION – SUSPENDED CEILING Refer to Figure 4 for the following steps. 1. Remove the ceiling tile from the ceiling. 2. Cut a four -inch diameter hole in the ceiling tile. 3. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following: a.
IN-CEILING INST ALLA TION – FIXED CEILING/WALL Refer to Figure 6 for the following steps. 1. Cut a four -inch diameter hole in the ceiling/wall. 2. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following: a. Place fingers on the circular marks located on the sides of the surface mount ring.
REINST ALL THE BUBBLE To install the bubble refer to Figure 7 and do the following: 1. Align the standoffs of the bubble with the slots of the back box.
SPECIFICA TIONS General Construction Back Box and Surface Mount Ring: ABS plastic Bubble: Polycarbonate Finish: White Environment: Indoor W eight Unit: .52 lb (.24 kg) Shipping: 2 lb (.91 kg) (Design and product specifications subject to change without notice.
W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
® World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C2477M (6/03) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2477M (6/03) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2477M (6/03) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2477M (6/03) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2477M (6/03) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2477M (6/03), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2477M (6/03).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2477M (6/03). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2477M (6/03) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
