Instruction/ maintenance manual of the product c24407m-g Pelco
Go to page of 12
Installa tion/Oper a tion 100 Series Camc losur e ® Inte gr a ted Camer a System C2407M-G (5/03) ® Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www .
[ 2 ] Pelco Manual C2407M-G (5/03).
Pelco Manual C2407M-G (5/03) [ 3 ] CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ..................................................................................... 4 DESCRIPTION ...........................................................
[ 4 ] Pelco Manual C2407M-G (5/03) IMPORT ANT SAFEGU ARDS AND WARNINGS 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
Pelco Manual C2407M-G (5/03) [ 5 ] CONDUIT PLUG CONCRETE WALL OR CEILING MOUNTING HARDWARE (NOT SUPPLIED) BASE SET SCREW 8-32 X .750 FLA T HEAD SCREW (SUPPLIED) 8-32 X .
[ 6 ] Pelco Manual C2407M-G (5/03) 3 Install Camera 1. Some indoor installations do not require a heater . If th e installation does not require a heater , remove t he heater board from the camera assembly . T o remove the heater apply pressure and press on the corner of the board.
Pelco Manual C2407M-G (5/03) [ 7 ] ADJUSTMENTS (COLOR CAMERA ONL Y) If you have a color camera, it is set up at the factory and normally requires no adjustments. Sometimes, however , adjustments may be necessary . 1. Remove the dome and trim ring using the supplied 1/8-inch hollow screwdriver bit.
[ 8 ] Pelco Manual C2407M-G (5/03) F ocus Adjustment for Fix ed F ocal Length Lens with Auto Iris To adjust the focus, it may be necessary to remove the heater board in order to loosen the locking screw on the bottom of the lens. To remove the heater board: 1.
Pelco Manual C2407M-G (5/03) [ 9 ] Switch Settings f or Fixed F ocal Length Lens Wi thout Auto Iris Refer to the switch drawing. The switch is located next to the lens.
[ 10 ] Pelco Manual C2407M-G (5/03) SPECIFICA TIONS General Operating T emperature: -50 ° to 122 ° F (-46 ° to 50 ° C) De-ices to 25 ° F (-4 ° C) Cable Entry: 3/4-inch (1.
Pelco Manual C2407M-G (5/03) [ 11 ] Re gulator y Notices FCC Class A (monoc hrome, EIA and CCIR cameras – e xcept auto iris models) This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to part 15 of the FCC rules.
[ 12 ] Pelco Manual C2407M-G (5/03) Pelco, the Pelco logo, Spectra, Genex, Legacy , Esprit, and Camclosure are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco.
An important point after buying a device Pelco c24407m-g (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco c24407m-g yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco c24407m-g - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco c24407m-g you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco c24407m-g will certainly help you make a decision on the purchase.
If you already are a holder of Pelco c24407m-g, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco c24407m-g.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco c24407m-g. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco c24407m-g along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
