Instruction/ maintenance manual of the product C2410M-I (1/06) Pelco
Go to page of 16
INST ALLA TION 150 Series Camclosure ® Integrated Camera Sy stem C2410M-I (1/06) In-Ceiling Mount.
.
C2410M-I (1/06) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Inst all in accordance with the manufacturer’ s instructions.
4 C2410M-I (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rule s. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation.
C2410M-I (1/06) 5 Description The 150 Series Camclosure ® integrated camera system is an in-c eiling dome incorporating a camera and lens package into a small, discreet, high-security enclosure designed for areas subject to heavy vandalism.
6 C2410M-I (1/06) Installation INSTALL BACK BOX MOUNTING DIRECTLY TO A W ALL OR CEILING 1. Cut a hole 3.5 inches (9 cm) in diameter in the ceiling or wall using the adapter plate as a template. 2. Connect the video cable. 3. Connect the power wires. • For 12 VDC, connect the 24 V AC/12 VDC (red) and GND (black) wires to input power .
C2410M-I (1/06) 7 MOUNTING TO CEILING T ILE 1. Remove the ceiling tile. 2. Using the adapter plate as a template, cut a hole 3.5 inches (9 cm) in diameter in the ceiling tile for the back box. Punch four screw holes in the ceiling tile. 3. Attach the back box to the ceiling tile and adapter plate with the four 8-32 x 1.
8 C2410M-I (1/06) 3. If the heater is installed, plug the heater connector from the camera into the mating connector inside the base. Plug the video connector from the camera into the mating connector inside the base. T urn on power to the camera and monitor .
C2410M-I (1/06) 9 INSTALL DOME AND T RIM RING Place the trim ring and dome over the back box. If the dome has a liner , position the viewing window over the lens of the camera. T i ghten the tamper -resistant screws with the supplied 1/ 8-inch hollow screwdriver bit.
10 C2410M-I (1/06) AUTO IRIS LEVEL ADJUSTMENT If you have a varifocal lens or fixed focal length l ens with an auto iris, you c an adjust the level setting to increase or decrease brightness. FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS .
C2410M-I (1/06) 11 SWITCH SETTINGS FOR FIXED FO CAL LENGTH LENS WITH AUTO IRIS Refer to the switch drawing. The switch is located ne xt to the lens. Automatic backlight compensation (factory setting) .
12 C2410M-I (1/06) SWITCH SETTINGS FOR V ARIFOCAL LENS The high resolution camera with varifocal lens and aut o iris is configured at the factory for automatic exposure. For manually setting and locking the white balance, plac e a white background in front of camera and turn off switch 1.
C2410M-I (1/06) 13 Specifications GENERAL Operating T emperature -50° to 122°F (-46° to 50°C) De-ices to 25°F (-4°C) Pan/T ilt Adjustment Manual; 360° pan; 180° tilt Construction Aluminum with.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, witho ut charge, any mer c handise proved defective in ma terial or wo rkmanship for a period of one year after th e date of shipment. Exception s to this warrant y are as noted be low: • Five years on F T/FR8000 Series fiber o ptic products.
REVISION H ISTORY Manual # Date Comments C2410M 11/99 Original version. C2410M 1/00 Revised installat ion instructions. Ad ded FCC notices. C2410M-A 1/00 Added varifoc al lens. Changed form at. C2410M-B 7/00 Added information on dome liner. C2410M-C 1/01 Added heater element cauti on.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C2410M-I (1/06) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2410M-I (1/06) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2410M-I (1/06) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2410M-I (1/06) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2410M-I (1/06) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2410M-I (1/06), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2410M-I (1/06).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2410M-I (1/06). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2410M-I (1/06) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
