Instruction/ maintenance manual of the product Z71 Asus
Go to page of 13
upgrade & replacement 5 – 1 Z 7 1 Installa tion & R eplacement Follow the individual procedures to perform the notebook’s installation and replacement of various major components. Z71 Series Notebook balances novelty and mo bility in an elegantly designed casing .
upgrade & replacement Z 7 1 5 - 2 HDD Insta llation & Replace ment The Z71 Series Notebook uses a n industry-standard 2½” HDD with IDE interface. You can install the HDD to any capacity of your choice within our approval and prior test. Installing HDD 1.
upgrade & replacement Z 7 1 5 - 3 4. Replace a new HDD into th e HDD Housing and secure 4 screws 5. Connect the HDD connector (mind that a direction of the connector by the empty pin position).
upgrade & replacement Z 7 1 5 - 4 6. Insert the hard disk module and connect the FPC and lay it down until it’s installed properly and secure 1 secrew (M2*6L(K)).
upgrade & replacement Z 7 1 5 - 5 Memory Installation & Repl acement The Z71 Seri es Notebook comes stan dard wit h 2 DDR sockets onboard. You can upgrade the total memory up to 1GB with two 512MB module. Installing & Replacing memory 1. Remove 9 screws (M2*6L(K)from back cover and remove it.
upgrade & replacement Z 7 1 5 - 6 Removi ng 2 nd Memory module 1. Re m o ve 2 sc r e w s (M2*5L(K) at bo t t o m c a se . 2. Release 3 keyboard latches with a pair of tweezers as shown below .
upgrade & replacement Z 7 1 5 - 7 4. Insert memory at a 30 ° angles and press down until it clic ks into the latches then put the memory cover . 5.
upgrade & replacement Z 7 1 5 - 8 CPU Installation & Replacement 1. Remove 9 screws (M2*6L(K)from back cover and remove it. 2. Remove 2 screws (M2*6L(K)) aside the CPU fan and disconnect FAN connector then take away the Fan Module.
upgrade & replacement Z 7 1 5 - 9 4. Turn the no n-removable scrw here 180 degrees counter-clockwise to loosen the CPU and take the CPU away. Note: If thermal module has no thermal pa d on it, please plus a thermal pad on the CPU die befor e assembling.
upgrade & replacement Z 7 1 5 - 10 5. Use the CPU vacuum to “suck up” the CPU then and turn the non-removable screw here 180 degrees clockwise to lock the CPU. 6. Install the CPU heat sink m odule gently and secure 4 screws (M2*6L(K)) by order upon the CPU module .
upgrade & replacement Z 7 1 5 - 11 8. Install back c over and secure 9 screws (M2*6L(K)) on it M2*6L.
upgrade & replacement Z 7 1 5 - 12 WLAN Module Insta llation & Replacement 1. Remove 9 screws (M2*6L(K) from back cover and remove it. 2. Remove 2 Antenna cables fr om Wireless LAN Module 3.
upgrade & replacement Z 7 1 5 - 13 4. Insert the mini-PCI module and push down to lock i t then connect the 2 antenna cables and put on the mini-PCI cover.
An important point after buying a device Asus Z71 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus Z71 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus Z71 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus Z71 you will learn all the available features of the product, as well as information on its operation. The information that you get Asus Z71 will certainly help you make a decision on the purchase.
If you already are a holder of Asus Z71, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus Z71.
However, one of the most important roles played by the user manual is to help in solving problems with Asus Z71. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus Z71 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
