Instruction/ maintenance manual of the product C2404M-A Pelco
Go to page of 16
® INST ALLA TION/OPERA TION 110 Series Camclosure ® Integrated Camera System With LowLight ™ DSS T echnology C2404M-A (4/05) C2404M-A.book Page 1 Monday, April 18, 2005 9:11 AM.
2 C2404M-A (4/05) Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C2404M-A (4/05) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
4 C2404M-A (4/05) REGULATORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C2404M-A (4/05) 5 W elcome Thank you for purchasing Pelco’ s Camclosure ® integrated camera system with LowLight ™ , DSS (digital slow shutter) technology. Y our new ICS110 Series surface mount dome system includes a high resolution, low light, color camera with auto iris and varifocal lens.
6 C2404M-A (4/05) Installation MOUNTING DIRECTLY TO SURFACE WIRING THROUGH BASE Follow the proceeding steps when feeding wire/cables through the base of the cover and back box: 1. Using the cover as a template, mark one of the large hole positions onto the mounting surface.
C2404M-A (4/05) 7 WIRING THROUGH SIDE CONDUIT Follow the proceeding steps when feeding wire/cables through the side conduit opening of the unit: 1. Attach the cover to the mounting surface (hardware not supplied). Use stainless steel hardware when installing the system outdoors.
8 C2404M-A (4/05) Install the Camera Module CHECK HEATER JUMPER The Camclosure is equipped with a heater to defrost the dome. Some installations may not require this heater . If the unit will never be subjected to a frost temperature, you can disable the heater, saving power .
C2404M-A (4/05) 9 INSTALL AND POSITION THE CAMERA 1. Plug the video connector from the camera into the mating connector inside the back box. 2. Position the camera so that the tab on the camera bracket is pointing out of the enclosure, away from the ceiling or wall.
10 C2404M-A (4/05) MAKE CAMERA SETTINGS ZOOM/FOCUS 1. Select a field of view by turning the zoom adjustment ring. 2. T ighten the zoom locking screw . 3. Adjust the focus by moving the focus locking screw clockwise/counterclockwise. 4. T ighten the focus locking screw .
C2404M-A (4/05) 11 AGC (AUTOMATIC GAIN CONTROL) AGC automatically adjusts the image to compensate for changes in light levels. ON (Default setting) – Enables the AGC mode.
12 C2404M-A (4/05) Install Dome and T rim Ring 1. Domes with Liners: Position the viewing window over the lens of the camera. a. Loosen the three Phillip screws located in the dome. b. Insert the blade of a standard screwdriver in one of the adjustment grooves.
C2404M-A (4/05) 13 Specifications Backbox Electrical Input V oltage 12 VDC or 24 VAC, ±10%, auto-sensing Power Consumption 13 watts or less Video Connector BNC General Operating T emperature -50° t.
14 C2404M-A (4/05) C2404M-A.book Page 14 Monday, April 18, 2005 9:11 AM.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C2404M-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2404M-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2404M-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2404M-A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2404M-A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2404M-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2404M-A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2404M-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2404M-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
