Instruction/ maintenance manual of the product C1969M-A Pelco
Go to page of 8
CCQ1400A-4 Color CCD Camera with 4 mm Lens Installation/ Operation Manual C1969M-A (1/02) ® Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.
2 Pelco Manual C1969M-A (1/02) IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
Pelco Manual C1969M-A (1/02) 3 DESCRIPTION OVERVIEW The CCQ1400A-4 color CCD camera with 4 mm lens is designed for use with the PMCQ14A 14-inch color quad monitor. A mini-DIN 6 connector in the back of the camera matches the connector on the back of the monitor .
4 Pelco Manual C1969M-A (1/02) INST ALLING THE CAMERA 1. Assemble and mount the camera and bracket. NOTE: The screws provided are intended for wood. If it is necessary to substitute screws for masonry or hollow wall mounting, be sure to use #6 or 4 mm hardware.
Pelco Manual C1969M-A (1/02) 5 CHECKOUT T able A. Checkout Procedure When Adding a Camera to the System This procedure assumes that power is on and that the full monitor checkout has been performed. STEP PROCEDURE RESUL TS 1 Calibrate camera. 2 At the monitor , press the CH button for the channel the new camera is using.
6 Pelco Manual C1969M-A (1/02) TECHNICAL SPECIFICA TIONS ELECTRICAL Input V oltage: 12 VDC, +/-2 VDC Power Consumption: 2 watts Signal Format: NTSC Scanning System: 2:1 interlace Sync System: Internal Horizontal Resolution: 330 TV lines (center) Image Size Area: 4.
Notice: Audio Monitoring on these Premises.
8 Pelco Manual C1969M-A (1/02) P elco , the Pelco logo , Camclosure, Esprit, Genex, Legacy , and Spectra are registered trademarks of P elco. ©Copyright 2002, P elco. Endura and ExSite are trademarks of P elco . All rights reser v ed. REVISION HISTOR Y Manual # Date Comments C1969M 2/00 Original version.
An important point after buying a device Pelco C1969M-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1969M-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1969M-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1969M-A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1969M-A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1969M-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1969M-A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1969M-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1969M-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
