Instruction/ maintenance manual of the product C1965M-C Pelco
Go to page of 12
® Installation/Operation PMCL15A TFT LCD Monitor C1965M-C (12/03) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: T el (800) 289-9100 • F AX (8.
[ 2 ] Pelco Manual C1965M-C (12/03) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 REGULA TORY NOTICES ..................................................
Pelco Manual C1965M-C (12/03) [ 3 ] Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
[ 4 ] Pelco Manual C1965M-C (12/03) DESCRIPTION The PMCL15A is a high resolution, 15-inch, thin film transistor (TFT) LCD color monitor. The unit produces a sharp picture with a resolution of 540 TV lines.
Pelco Manual C1965M-C (12/03) [ 5 ] Table A. Video Coaxial Cable Requirements Cable Type* Maximum Distance RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG1 1/U 1,500 ft (457 m) * Minimum cable requirements: 75 ohms impedance All-copper center conductor All-copper braided shield with 95% braid coverage Figure 2.
[ 6 ] Pelco Manual C1965M-C (12/03) Figure 3. Looping Operation - Maximum of Three Monitors With External Video Equipment.
Pelco Manual C1965M-C (12/03) [ 7 ] Figure 4. PMCL15A, Front Panel Controls Channel Menu 1 2 3 4 5 00871 Front Panel Contr ols Refer to Figure 4. 1 CHANNEL BUTT ON Channel Select - Press the Channel button once to display a camera view . Auto Scan - Press and hold the button for three seconds to sequence through composite video channels.
[ 8 ] Pelco Manual C1965M-C (12/03) OPERA TION 1. T urn the monitor ’s main power switch ON. The power switch is located on the base of the monitor (refer to Figure 1). 2. Push IN the power button located on the front of the monitor (refer to Figure 4).
Pelco Manual C1965M-C (12/03) [ 9 ] V ideo Mode BRIGHTNESS Press the button to increase brightness and the button to decrease brightness. Default setting is 80%. CONTRAST Proper adjustment will allow maximum gradations between the darkest and lightest picture contrast.
[ 10 ] Pelco Manual C1965M-C (12/03) PC Mode CONTRAST Proper adjustment will allow maximum gradations between the darkest and lightest picture contrast. Press the button to increase contrast and the button to decrease contrast. Default setting is 85% BRIGHTNESS Press the button to increase brightness and the button to decrease brightness.
Pelco Manual C1965M-C (12/03) [ 11 ] MAINTENANCE If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. To reduce the risk of electrical shock, do not remove the cover or back of monitor .
[ 12 ] Pelco Manual C1965M-C (12/03) REVISION HISTOR Y Manual # Date Comments C1965M 6/01 Original version. C1965M-A 7/01 Modified format and specifications. C1965M-B 7/01 Revised Front Panel Controls section. C1965M-C 12/03 Changed specifications and illustrations for BNC connector; updated icons.
An important point after buying a device Pelco C1965M-C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1965M-C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1965M-C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1965M-C you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1965M-C will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1965M-C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1965M-C.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1965M-C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1965M-C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
