Instruction/ maintenance manual of the product c1943m Pelco
Go to page of 20
CM9760-VCRC-P VCR Contr oller Installation/ Operation Manual C1943M (9/99) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or F.
2 P elco Manual C1943M (9/99) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS ................................................................ 3 DESCRIPTION ....................................................................................
P elco Manual C1943M (9/99) 3 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be obser v ed. 1. Installation and servicing should only be done by qualified service personnel and con- form to all local codes.
4 P elco Manual C1943M (9/99) MODELS CM9760-VCRC-P VCR control unit capable of controlling 64 VCRs per unit. VCR control is specific to P elco TLR2096 .
P elco Manual C1943M (9/99) 5 DIP SWITCHES With the front panel remov ed, DIP switch 1 and DIP s witch 2 are visible . These two ten-position DIP switches configure and define man y functions of the CM9760-VCRC-P . Figure 3 identifies the relativ e locations of DIP s witches 1 and 2.
6 P elco Manual C1943M (9/99) REAR VIEW The rear of the unit is illustrated in Figure 4. F rom left to right are the following: 1 . The four 16-input b locks of VCR connectors in the form of screw-type connectors with associated mating plugs (one shown in Block 1) running from the left rear to middle right of the unit 2.
P elco Manual C1943M (9/99) 7 INPUT VCR CONNECTORS Physically , each of the four VCRC-P input connectors consists of the same number of input screw-type terminals. Each input group uses a dual-row removable plug and each plug is associated with 8 VCR inputs.
8 P elco Manual C1943M (9/99) RELA Y OUTPUT CONNECTOR Figure 6 illustrates the rela y output connector and its relative por t pin assignments . The connector is a three-position plug with screw-type contacts similar in operation to the mat- ing connectors just discussed.
P elco Manual C1943M (9/99) 9 DB-9 Connector Pin-outs The DB-9 connector is reserved for f actor y use only . RJ-45 Connector RJ-45 connector pin-outs are illustrated in Figure 7. Because both RJ-45 connectors have the same wiring pin-outs, they require the same “flipped” cable.
10 P elco Manual C1943M (9/99) POWER CONNECTIONS The CM9760-VCRC-P utilizes an auto-ranging internal transf or mer circuit that allows the in- put power to r ange from 100-240 V AC @ 50/60 Hz. Associated with the input pow er is the pow er ON/OFF switch and the input po wer fuse.
P elco Manual C1943M (9/99) 11 SETUP PRELIMINAR Y DISCUSSION The CM9760-VCRC-P enables automatic control (via macro e xecution) or man ual control (from the CM9760-KBD) of sev en predefined VCR functions. Each VCRC-P can control up to 64 VCRs. VCR control is implemented by associating System 9760 GPIs to VCRs.
12 P elco Manual C1943M (9/99) Figure 10. DIP Switch Functions NOTE: POSITIONS 9 AND 10 ARE NOT USED AND SHOULD BE LEFT IN THE F ACT ORY DEF A UL T “OFF” POSITION.
P elco Manual C1943M (9/99) 13 SOFTW ARE SETUP–USING THE MGR PROGRAM TO CONFIGURE VCRC-P OPERA TION The VCRC-P unit controls up to 64 VCRs per unit and provides se ven basic functions of VCR control direct from the CM9760 ke yboard. These controls include Stop , Pause , Play , Eject, F ast Forward, Re wind, and Record.
14 P elco Manual C1943M (9/99) 7 . This brings up the GPI SETUP file dialog box (.GPI file). Refer to Figure 12. 8. Program logical GPI numbers f or all the physical numbers that will be used. The ph ysi- cal GPI numbers correspond to a specific VCR control signal on the VCR controller .
P elco Manual C1943M (9/99) 15 Figure 13. Configuring the COMMS file for VCRC-P Operation 10 . Define operator access, sa ve the GPI file, return to the MGR main menu screen and press the tab to bring up the COMMS file (.SCP file). Refer to Figure 13.
16 P elco Manual C1943M (9/99) INST ALLA TION Physical installation of the VCRC-P unit is relatively simple, although various configurations are possible. DIRECT RACK-MOUNT HOOK-UP Regardless of the location of a VCRC-P unit, it will more than likely be installed in a rack (refer to Figure 14).
P elco Manual C1943M (9/99) 17 OPERA TIONAL OVERVIEW The basic function of the VCRC-P unit is to act as an interface between the user/operator of the system and any connected VCRs. Each VCRC-P processes and executes only com- mands with addresses that match the controller address.
18 P elco Manual C1943M (9/99) OPERA TING THE CM9760-VCRC-P FROM THE CM9760-KBD Direct control operation of VCRs attached to VCRC-Ps from a CM9760-KBD is relatively straightf orward. Once the system is running and the ke yboard is online, direct control of a VCR is as follows: 1.
P elco Manual C1943M (9/99) 19 SPECIFICA TIONS Electrical Input V oltage: Auto-r anging 100-240 V AC , 50/60 Hz P o wer: Consumption: 30 vA Data P or ts Input: RS-422, RJ-45 connector DIP switch selectable baud rate Output: RS-422, RJ-45 connector .
20 P elco Manual C1943M (9/99) P elco, the P elco logo, Camclosure, Esprit, Gene x, Legacy , System 9760, and Spectra are registered trademarks of P elco. © Cop yr ig ht 1999, P elco. Endura and ExSite are trademarks of P elco. All rights reser v ed.
An important point after buying a device Pelco c1943m (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco c1943m yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco c1943m - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco c1943m you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco c1943m will certainly help you make a decision on the purchase.
If you already are a holder of Pelco c1943m, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco c1943m.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco c1943m. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco c1943m along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
