Instruction/ maintenance manual of the product C1937M-C (4/03) Pelco
Go to page of 12
® Installa tion/Oper a tion CC3701H-2 and CC3701H-2X DSP Color Camer a with EDR C1937M-C (4/03) Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.
[ 2 ] Pelco Manual C1937M-C (4/03) Prior to installation and use of this product, the following WARNINGS should be observed. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
Pelco Manual C1937M-C (4/03) [ 3 ] REGULA TORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
[ 4 ] Pelco Manual C1937M-C (4/03) CAMERA LA Y OUT Figure 1. Camera Layout INST ALLA TION Lens Mounting The camera can use a fixed iris, manual iris or auto iris lens. The camera is factory set for a CS-mount lens, but is easily adjusted for a C-mount lens.
Pelco Manual C1937M-C (4/03) [ 5 ] Figure 4. Power Supply Connections 24 V AC 12 VDC CLASS 2 ISOLATED POWER SUPPLY CLASS 2 ISOLATED POWER SUPPLY 20155 Camera Mounting Use a standard 1/4-20 screw (provided) with a maximum thread length of 3/8-inch (10 mm) for top or bottom camera mounting.
[ 6 ] Pelco Manual C1937M-C (4/03) AC operation only - If you are wiring more than one camera to the same transformer , connect one side of the transformer to the same terminal on all cameras, and connect the other side of the transformer to the re- maining terminal on all cameras.
Pelco Manual C1937M-C (4/03) [ 7 ] LENS SETUP AND FOCUS PR OCEDURES V ideo Drive Auto Iris Lens Set the lens mode selector switch to AIV . Switch the ESC and AGC OFF . Refer to the lens instructions and adjust the lens for the optimum picture (video output level of 1V peak-to-peak).
[ 8 ] Pelco Manual C1937M-C (4/03) SWIT CH SETTINGS Figure 6. DIP Switch Default Settings OFF OFF OFF OFF AIV INT NOR OFF OFF AW1 BLC AGC OPT ESC AID LL SHP LC EDR AW2 ON PHASE LEVEL + - H L 1 2 3 4 5 6 7 8 9 10 20157 1 BLC - Back Light Compensation OFF (Default setting) - Disables the BLC mode.
Pelco Manual C1937M-C (4/03) [ 9 ] 7 NOR/SHP - Sharpness NOR (Default setting) - Sets the camera to normal sharpness mode. SHP - Enables the Sharpness mode. Enhances picture detail by increasing the aperture gain of the camera, sharpening the edges in the picture.
[ 10 ] Pelco Manual C1937M-C (4/03) CAMERA SYNCHRONIZA TION (AC OPERA TION ONL Y) When using more than one camera power supply , a brief vertical roll may occur on the monitor when a camera view is switched. T o eliminate vertical roll, adjust the phase control by synchronizing, or line-lock- ing, the cameras to one another .
Pelco Manual C1937M-C (4/03) [ 11 ] SPECIFICA TIONS GENERAL CCD Sensor: 1/3-inch interline transfer Picture Elements CC3701H-2: 768 (H) x 494 (V) CC3701H-2X: 752 (H) x 582 (V) Sensing Area: 6 mm diago.
[ 12 ] Pelco Manual C1937M-C (4/03) REVISION HISTOR Y Manual # Date Comments C1937M 3/02 Original version. C1937M-A 5/02 Revised the lens connector wiring chart. C1937M-B 8/02 Added certifications. Revised Important Safeguards and W arnings. C1937M-C 4/03 Added S-mark certification.
An important point after buying a device Pelco C1937M-C (4/03) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1937M-C (4/03) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1937M-C (4/03) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1937M-C (4/03) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1937M-C (4/03) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1937M-C (4/03), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1937M-C (4/03).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1937M-C (4/03). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1937M-C (4/03) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
