Instruction/ maintenance manual of the product C1932M Pelco
Go to page of 8
CC3320/CC4620 Series Color Cameras Installation/ Operation Manual C1932M (8/99) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
Page 2 CC3320 and CC4620 Cameras Installation Instructions INTRODUCTION These instructions cover Pelcos CC3320 and CC4620 Series cameras. Read all of these instructions. Use them to install your camera and have them available for its lifetime. Refer to T able A for the camera models and their features.
Page 3 Installation Instructions CC3320 and CC4620 Cameras PRODUCT SAFETY Ensure installation and servicing is carried out by qualified personnel. Isolate from the supply circuit before any servicing. Installation method and materials must be capable of supporting four times the total weight of the unit.
Page 4 CC3320 and CC4620 Cameras Installation Instructions CAUTIONS CAUTION In order to avoid damaging your camera, note the following points. 1) The camera has threaded mounting points on the top and bottom of the case. Only use a standard, photographic mounting bolt with a 1/4-20 UNC thread.
Page 5 Installation Instructions CC3320 and CC4620 Cameras FUNCTION SWITCHES On the side of the camera is a hinged flap. The hinged flap covers a lens level potentiometer and 10 function switches.
Page 6 CC3320 and CC4620 Cameras Installation Instructions FUNCTION SWITCHES Shutter speed switches Shutter speeds are selected with DIP switches 8, 9 and 10. DIP switch 7 must be down to enable manual shutter speed selection. For EI, BLC and Flickerless functions, switch 7 must be up.
Page 7 Installation Instructions CC3320 and CC4620 Cameras LENS CONNECTION Fixed and manual iris lenses (for indoor use only) require no wiring connections. Auto-Iris Lenses Connections for auto-iris lenses are located on the rear of the camera. Connect auto-iris lenses to the 3-terminal connector according to the diagram below .
Page 8 CC3320 and CC4620 Cameras Installation Instructions FOCUS ADJUSTMENT Zoom Lenses Set the lens focus to infinity and fully open the iris by covering the lens with a suitable neutral density (ND) filter . Zoom out to the widest field of vision and view a distant object.
An important point after buying a device Pelco C1932M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1932M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1932M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1932M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1932M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1932M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1932M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1932M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1932M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
