Instruction/ maintenance manual of the product C1917M Pelco
Go to page of 24
CC4700-2 1/2-Inch Color Camera Installation/ Operation Manual C1917M (12/97) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or.
22 Pelco Manual C1917M (12/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS ............................... 1 1.2 REGULA TOR Y NOTICES .
Pelco Manual C1917M (12/97) 23 LIST OF ILLUSTRA TIONS Figur e Page 1 Location of Parts and Controls .......................................................... 4 2 Removal of Camera Cover ................................................................
24 Pelco Manual C1917M (12/97) iv (This page intentionally left blank.).
Pelco Manual C1917M (12/97) 1 Please thor oughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
2 Pelco Manual C1917M (12/97) 1.2 REGULA TOR Y NOTICES This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Pelco Manual C1917M (12/97) 3 2.0 DESCRIPTION The CC4700-2 color video camera has the following features: Imager The camera uses a 1/2-inch CCD (Charge Coupled Device). High Sensitivity The camera gives a clear picture even under very gloomy conditions.
4 Pelco Manual C1917M (12/97) 3.0 LOCA TION OF P AR TS AND CONTROLS Figure 1. Location of Parts and Controls MOUNTING SCREW HOLES BACK FOCUS ADJUSTMENT SCREW LENS MOUNT (C-MOUNT) LENS CONNECT OR (4-PI.
Pelco Manual C1917M (12/97) 5 4.0 INST ALLA TION 1. Remove the six (6) Phillips screws that hold the upper cover to the camera body and remove the cover (refer to Figure 2). 2. Set the internal switches according to the conditions in which the camera will be used (refer to Figures 2 and 3).
6 Pelco Manual C1917M (12/97) 3. Replace the upper cover on the camera body . 4. Make sure that you have the right type of lens to install on the camera. The lens must be a C-mount type, and the screw thread must not project more than 9 mm (3/8-inch) from the lens mounting surface (refer to Figure 4).
Pelco Manual C1917M (12/97) 7 6. When using an auto-iris lens, install it as follows. For a manual iris lens, omit step c. Refer to Figure 6. a. Unscrew the lens mount cap (1). b. Screw in the lens (2). c. Plug in the lens cable (3). Figure 6. Lens Installation Figure 7.
8 Pelco Manual C1917M (12/97) 8. Connect power to the camera (refer to Figure 8). This camera must always be operated with a 24 V AC class 2 power supply . In the U.S.A., use a power supply that is UL Listed. In Canada, use a power supply that is CSA Certified.
Pelco Manual C1917M (12/97) 9 Wire Gauge Maximum distance from transformer to load T able A. 24 V AC Wiring Distances The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop. (10-percent is generally the maxi- mum allowable voltage drop for AC-powered devices.
10 Pelco Manual C1917M (12/97) 9. Connect a video cable to the VIDEO OUT connector on the camera (refer to Figure 8). Refer to T able B for the type of video coaxial cable to use. 10. Set the SYNC (synchronization) switch. INT (internal): for using the internal synchronizing signal.
Pelco Manual C1917M (12/97) 11 4.1 ADJUSTMENTS T urn on the camera power and make the following adjustments. 4.1.1 White Balance After fitting the lens and making all the installation connections, use a monitor to check the picture and set the white balance as described below (refer to Figure 9).
12 Pelco Manual C1917M (12/97) 4.1.2 V er tical Phase Use the V PHASE (vertical phase) button to compensate for vertical phase discrep- ancies that may occur when two or more cameras are used when the SYNC switch is set to L.L. Use the tip of a ballpoint pen or the like to press the button.
Pelco Manual C1917M (12/97) 13 Zoom Lens Models 1. With the camera operating, view an object at least 75 feet away . 2. Make sure the lens iris is wide open. * If outdoors use a neutral density filter in front of the lens to insure that the iris is fully open.
14 Pelco Manual C1917M (12/97) 5.0 OPERA TION A void aiming the camera at a very bright object (such as light fixtures) for an ex- tended period..
Pelco Manual C1917M (12/97) 15 6.0 TROUBLESHOOTING The following conditions that may be observed when using a CCD camera are not associated with any fault of the camera.
16 Pelco Manual C1917M (12/97) 7.0 MAINTENANCE Be careful not to spill water or other liquids on the unit, or to get combustible or metallic material inside the body . Foreign material inside the camera could cause it to fail or be a cause of fire or electric shock.
Pelco Manual C1917M (12/97) 17 8.0 SPECIFICA TIONS Pickup Device: 1/2-inch interline transfer type CCD Effective Picture Elements: 768 (H) x 494 (V) Sensing Area: 6.
18 Pelco Manual C1917M (12/97) Dimensions: See Figure 10 Weight: 660 g approx. (1 lb 7 oz) Fuse: 125 VAC, 500 mA (Design and product specifications subject to change without notice.) Figure 10. CC4700-2 Dimension Drawing BA CK FOCUS LENS COLOR VIDEO CAMERA Hi Resolution 6.
Pelco Manual C1917M (12/97) 19 NOTES.
20 Pelco Manual C1917M (12/97) Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco.
An important point after buying a device Pelco C1917M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1917M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1917M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1917M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1917M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1917M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1917M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1917M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1917M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
