Instruction/ maintenance manual of the product C1665M-A Pelco
Go to page of 12
INST ALLA TION TW3004P Passive Four -Channel V ideo T ransceiver C1665M-A (1/06).
2 C1665M-A (1/06) Description The TW3004P is a four-channel passive video transceiver that can transmit multiple video signals over unshielded twisted pair (UTP) cable.
C1665M-A (1/06) 3 Installation Make sure all parts are present for the unit. 1 T erminal Block (with tension clamps) 1 Wall Clip MOUNTING The TW3004P transceiver is three rack units high and can be mounted into a fi ber rack or onto a wall using a fiber wall mount kit or the supplied wall clip.
4 C1665M-A (1/06) USING A WALL CLIP To attach the TW3004P transceiver to a wall using the supplied wall clip, refer to Figure 2 and do the following: 1.
C1665M-A (1/06) 5 APPLICATIONS Figures 4-7 show how to use the transceivers in various applications. The terminal block on the back of the TW3004P has tension clamps instead of screw terminals. To connect the UTP wires to the terminal block: 1. Use a small screwdriver to open the clamps (+ and -) for each channel.
6 C1665M-A (1/06) Figure 4. Connecting T wo T ransceivers 1 2 3 4 1 2 3 4 TW3004P MONITOR TW3004P UTP POWER CONNECTOR FOR PELCO BADGE FIXED CAMERA.
C1665M-A (1/06) 7 Figure 5. Connecting a UTP Camera to a UTP Receiver NOTE: UTP cameras have a 10-pin RJ-45 connector. Standard RJ-45 connectors have 8 pins.
8 C1665M-A (1/06) Figure 6. Coaxitron PTZ Control 1 2 3 4 TW3004P UTP VIDEO MONITOR SPECTRA COAXITRON POWER CONNECTOR FOR PELCO BADGE VC-UTP BOARD MATRIX.
C1665M-A (1/06) 9 Figure 7. UTP Camclosure to UTP Receiver 1 2 3 4 MONITOR TW3004P UTP CAMCLOSURE POWER CONNECTOR FOR PELCO BADGE BLUE WIRE = GRAY WIRE =.
10 C1665M-A (1/06) Specifications ELECTRICAL Power Source 12 VDC (for Pelco badge only) Wire T ype Unshielded twisted pair (24 AWG maximum) Wire Category Cat3 or better Wire Impedance 100 ohms +/ - 2.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C1665M-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1665M-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1665M-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1665M-A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1665M-A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1665M-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1665M-A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1665M-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1665M-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
