Instruction/ maintenance manual of the product C1662M-A Pelco
Go to page of 12
INST ALLA TION TW3000P Series Passive Multi-Channel V ideo T ransceivers C1662M-A (1/06).
2 C1662M-A (1/06) Description The TW3000 Series multi-channel video transceivers can transmit multiple video signals over unshielded twisted pair (UTP) cable. The receivers are passive and require no power . The transceivers are available with 8, 16, or 32 channels and can be mounted into an industry standard 19-inch (48.
C1662M-A (1/06) 3 BACK VIEW Figure 1. Back View of TW3008P , TW3016P , TW3032P Rack Ears: Allow mounting into an industry standard 19-inch wide equipment rack. Thumbscrews: Allow back panels to be removed. Panel with Connectors: The TW3008P and TW3016P have one blank panel.
4 C1662M-A (1/06) Installation Make sure all parts are present for the units. TW3008P 4 Rack mount screws, 10-32 x 0.750-inch, Phillips, pan head (U.S.) 4 Rack mount screws, M6 x 1, 20 mm 4W ashers 2 Screw T erminal Connectors TW3016P 4 Rack mount screws, 10-32 x 0.
C1662M-A (1/06) 5 MOUNTING The TW3008P , TW3016P , and TW3032P transceivers are 1 RU (1.75”) high and are supplied with the necessary parts for mounting into an industry standard 19-inch (48.26 cm) wide equipment rack. The units can also be placed on a fl at surface, such as a shelf.
6 C1662M-A (1/06) APPLICATIONS Figures 3-6 show how to use the transceivers in various applications. Always connect + to + and - to - . The TW3032P is used as an example in Figures 3-6. T able A shows the distance in feet with coaxitron or video only when using a particular type of Cat cable.
C1662M-A (1/06) 7 Figure 4. Connecting a UTP Camera to a UTP Receiver NOTE: UTP cameras have a 10-pin RJ-45 connector. Standard RJ-45 connectors have 8 pins.
8 C1662M-A (1/06) Figure 6. Coaxitron PTZ Control 12 3 45 678 9 1 0 1 1 1 2 1 3 1 4 1 5 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 TW3032P UTP VIDEO MONITOR SPECTRA COAXITRON + - + - VC-UTP BO.
C1662M-A (1/06) 9 Service REPLACING A BACK PANEL Y ou can replace a blank back panel or a back panel with connectors easily . Figure 7 shows a blank panel being removed after the two thumbscrews are loosened. The panels with connectors can be removed the same way.
10 C1662M-A (1/06) Specifications ELECTRICAL Power Source No power required Wire T ype Unshielded twisted pair (24 AWG maximum) Wire Category Cat3 or better Wire Impedance 100 ohms +/ - 20% Wire Dist.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C1662M-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1662M-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1662M-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1662M-A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1662M-A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1662M-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1662M-A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1662M-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1662M-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
